Summary of ExCam IP1354
Page 1
Ex cam ip13xx user manual.
Page 2
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 2 of 44 content 1 introduction .............................................................................................................. 5 2 technical data ................................................................................
Page 3
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 3 of 44 table of figures figure 1.1 – excam ip13xx series with wall mount bracket and roof ............................... 5 table 4.1 – model key ..............................................................................................
Page 4
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 4 of 44 revision history product: t08 excam ® ip135x series title: user manual excam ® ip135x series type 08 doc. -id. 141021-pt08ba-tg-excam ip135x series_en_rev.01 author: thiemo gruber date: october 21, 2014 rev.- index date name remar...
Page 5
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 5 of 44 1 introduction the excam ip13xx series is a camera system (type 08) manufactured by samcon prozessleittechnik gmbh which can be used for various applications, preferably within hazardous areas of the chemical and/or petro-chemical...
Page 6
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 6 of 44 2 technical data 2.1 parameters of the explosion protection identification marks according to directive 94/9/eg (until apr 20, 2016): directive 2014/34/eu: ii 2g (zone 1 and 2) ii 2d (zone 21 and 22) i m2 explosion protection (gas...
Page 7
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 7 of 44 2.2 electrical parameters of the camera 2.2.1 axis p1354 power supply: poe, ieee 802.3af class 3 reference power: ±48 v dc (44...54 v dc) maximum power input: 7.2 w 2.2.2 axis p1357 power supply: poe, ieee 802.3af class 3 referenc...
Page 8
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 8 of 44 2.3 electrical parameters of the heating (optional) reference power u n : 24 v dc nominal power p n : 20 w for type l (t amb ≥ -30°) 40 w for type l (t amb ≥ -60°) attention! The power consumption of the housing heating is determi...
Page 9
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 9 of 44 2.4 system cable skd02-t description: samcon system cable digital (type „skd02-t“) for low temperature ranges, data transfer and power supply of the camera modules m1145 and m1145-l (din en 60079-14: 2014 con- form) sheath color: ...
Page 10
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 10 of 44 user interface: p(plug) version: rj-45 stecker (eia/tia- 568b), e.G. Weidmüller ie-ps-rj45-fh-bk, phoenix contact vs-08-rj45-5-q/ip20 etc., 10base-t/100base-tx poe k(terminal block) version: about 12 cm stripped: 8 x single condu...
Page 11
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 11 of 44 conductor design: 3g1.5 (0012838), 3 x 1.5 mm 2 (ø=1.4 mm), fine wired tinned copper strand according to. Iec 60228 / vde 0295, class 5, with protective earth (gn/ye) copper index: 43.0 kg/km weight: 96.0 kg/km tensile strength: ...
Page 12
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 12 of 44 2.6.1 axis p1354 user manual: http://www.Axis.Com/files/manuals/um_p1354_1463736_en_1505.Pdf 2.6.2 axis p1357 data sheet: http://www.Axis.Com/files/datasheet/ds_p1357_1471705_en_1505.Pdf user manual: http://www.Axis.Com/files/man...
Page 13
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 13 of 44 2.7 other technical data permitted ambient temperature (mtbf) 6 : - 10 °c … +50 °c (type n / p1365) - 10 °c ….+40 °c (type n / p13xx) - 30 °c … +40 °c (type l) - 60 °c … +40 °c (type ll) protection level en 60529/ iec 529: ip68 t...
Page 14
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 14 of 44 protective coating 8 : standard color ral7035 (all ral colors and special colors possible!), duralmit® 2k-pur structure, type dspt (isocyanate netted, polyester modified acrylate resin, fine structure (1.6…2.0 [mm] nozzle), surfa...
Page 15
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 15 of 44 weight (without accessories): 6800 g (with „k1“ cable gland flange) 7500 g (with „k2“ cable gland flange) weight of accessories: 900 g (wall mount bracket wmb-l) 800 g (twin adapter wmb-xta) 750 g (hood wpr-va2.1) 100 g (hinge at...
Page 16
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 16 of 44 3 safety guidelines please observe the safety guidelines indicated in der ex installation manual of the t08 excam series! 4 illustration of the model key the following model options are currently available for the excam ip13xx se...
Page 17
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 17 of 44 6) 005 = length of the connection line in meter at delivery. The standard cable length is 5 m (minimum/maximum cable length: 001 …100 [m]) information: according to din en 60079-14:2014 [chapter 10.6.2]) it is, at a cable length ...
Page 18
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 18 of 44 5 commissioning attention! Please observe the national regulations regarding security, installa- tion, and accident prevention (e.G. Din en 60079-14 or din vde 0118- 1:2010-02) for the erecting of electrical plants in mining etc....
Page 19
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 19 of 44 the excam ® ip13xx series is delivered with the electrical connection cable type skd02- t suitable for the hazardous area. Optionally, the camera can dispose of a power cable (standard is a type „Ölflex® 440p“).The maximum cable ...
Page 20
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 20 of 44 5.2.2 connection and protection figure 5.2 – cable gland and supply cable figure 5.3 – excam ip13xx t08-va2.2.K1.Bor-c-xxx-k-n cable gland 1 skd02-t - digital video stream, control and power supply (poe) of the camera module cabl...
Page 21
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 21 of 44 figure 5.4 – excam ip13xx t08-va2.2.K1.Bor-c-xxx-p-n figure 5.5 – excam ip13xx t08-va2.2.K1.Bor-cb-xxx-p(k)-l(l)(h) via the 8 (+1) -wire green patch cable skd02-t, the communication and the data transfer to connected network devi...
Page 22
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 22 of 44 in case the camera disposes of a plug (figure 5.4); it has to be plugged into the rj45 poe slot of the network device. Due to the design, a faulty connection or pin assignment is not possible. The network device can already be su...
Page 23
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 23 of 44 n.A. Poe gnd wh / bn 7 0,33 0.64 solid conductor cu blank n.A. Poe gnd bn 8 0,33 0.64 solid conductor cu blank shield/ gnd (complete conductor bunch) bk 9 n/a n/a shield braid of tinned copper wires Ø=0.13 mm (awg 36) shield (sin...
Page 24
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 24 of 44 in case the excam ip13xx is supplied via a poe capable device, an additional safe- guarding of the power supply is not necessary. The power supply is executed by the poe network device via an electronic with intelligent set-up. T...
Page 25
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 25 of 44 5.3 testing of the status led through the sight glass, the status led is visible. Prior to accessing the camera via the web interface, the proper functioning of the camera should be tested. The booting pro- cess of the excam ip13...
Page 26
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 26 of 44 5.4 step 3: adjusting the lens this step is only required in case the default settings of the picture or the user settings carried out via the web interface (focus assistant, sharpness, digital zoom etc.) do not deliver the desir...
Page 27
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 27 of 44 5.4.1 work preparation attention! Please carry out any preoperational work carefully and in accordance with the applicable regulations. Attention: note: depending on the zone classification, it might be necessary to obtain a work...
Page 28
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 28 of 44 figure 5.8 – removing the protection roof (1/2) figure 5.9 – removing the protection roof (2/2) to open the enclosure (t07 va2.2) of the excam ip13xx series, loosen the four hexa- gon socket screws (din 912/ iso 4762) located at ...
Page 29
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 29 of 44 figure 5.10 – opening the excam ipxxx pull out very carefully the lead flange in a straight manner, ensuring that the board mod- ule does not tilt. Due to the created lower pressure, this might require some additional effort. The...
Page 30
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 30 of 44 5.4.3 adjusting the focus and angle the default focus of excam ip13xx network camera is set to an object distance of ap- proximately 10 m; the angle is set to the maximum wide range. Depending on the indi- vidual camera module, t...
Page 31
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 31 of 44 figure 5.12 – mechanical adjustments at the lens 5.4.4 extracting/inserting an sd storage card the excam ip13xx disposes of a slot for a microsdhc storage card. Saved video files can be viewed or deleted via the web interface; th...
Page 32
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 32 of 44 please pay attention when inserting / extracting the storage card. Do not damage the connection cable, terminals, or the cb06 circuit board! Do not bend the aluminum mounting adapter as otherwise the optical axis of the equipment...
Page 33
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 33 of 44 attention! In case the flameproof joint has been damaged mechanically, the housing must not be used anymore! Attention! Do not lock-in any foreign objects inside the housing please make sure that the disassembled screw locks (was...
Page 34
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 34 of 44 6 network access and visualization the following steps describe the most important steps for the initial commissioning of the camera. The configuration menu of the web surface allows an intuitive navigation and offers several con...
Page 35
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 35 of 44 6.2 assigning the ip address the excam ip13xx is an ethernet network camera requiring an ip address to access it. Usually a dhcp server is integrated in most networks which automatically assigns an ip address. In case there is no...
Page 36
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 36 of 44 6.3 password / identification the default user name is: root the default password is: root when a system reset of the equipment has been carried out, please follow the instruc- tions below: in order to allow access to the camera,...
Page 37
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 37 of 44 7 maintenance / servicing / alterations the national regulations concerning the maintenance and servicing of electrical devices within hazardous areas are to be observed. The required maintenance intervals are specific to the ind...
Page 38
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 38 of 44 10 drawings attention: the technical drawings show t08 excam ip13xx cameras and integrated pressure barrier within the cable gland (compound grouting of the single conductors). The design shows the maximum dimen- sions! For cable...
Page 39
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 39 of 44 t08-va2.2.K2.Bor-c-xxx-x-n figure 10.2 – dimensions of the t08 excam ip13xx with k2 flange.
Page 40
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 40 of 44 t08-va2.2.K1.Bor-c-xxx-x-l(l) with accessories figure 10.3 – dimensions of the t08 excam ip13xx with accessories.
Page 41
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 41 of 44 11 notes.
Page 42
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 42 of 44.
Page 43
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 43 of 44.
Page 44
Doc.-id: 141021-pt08ba-tg-excam ip13xx series_en_rev.03, page 44 of 44 schillerstrasse 17, 35102 lohra-altenvers www.Samcon.Eu, info@samcon.Eu fon: +49 6426 9231-0, fax: - 31.