Samcon ExCam miniZoom User Manual

Summary of ExCam miniZoom

  • Page 1

    Ex cam ® minizoom user manual.

  • Page 2

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 2 von 24 content 1 document overview ................................................................................................. 4 2 technical data ...........................................................................................

  • Page 3

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 3 von 24 table of figures figure 1.1 document overview .......................................................................................... 4 figure 5.1 potential equalization t03- va… ......................................................

  • Page 4

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 4 von 24 1 document overview figure 1.1 document overview the present document is marked in red . 2 technical data 2.1 parameters of the explosion protection t03 excam series: (atex) - ex installation manual - ec declaration of conformity - e...

  • Page 5

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 5 von 24 identification marks according to directive 94/9/eg: ii 2g (zone 1 and 2) ii 2d (zone 21 and 22) explosion protection (gas): ex d iic t6 gb or ex d iib t6 gb explosion protection (dust): ex t iiic t80° c db ip67 ec-type examination: ...

  • Page 6

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 6 von 24 2.4 mechanical parameters housing material: stainless steel 1.4301 (aisi 304) and stainless steel 1.4305 (aisi 303) optional: stainless steel 1.4401 (aisi 316) or stainless steel 1.4404 (aisi 316l) glass material: borosilicate protec...

  • Page 7

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 7 von 24 2.7 lens af zoom lens: 10 x optical / 4 x digital focal distance (f): 4.2 mm to 42.0 mm angle of view: 46° (wide) to 4.6° (tele) aperture: f1,8 to f2,9 (1) minimal illumination: 1.5 lux recommended illumination: 100 to 100.000 lux mi...

  • Page 8

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 8 von 24 3 safety guidelines please observe the safety guidelines indicated in the atex installation manual of the excam series! 4 illustration of the model key the following model options are currently available for the excam ® minizoom: pro...

  • Page 9

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 9 von 24 5 commissioning attention! Please observe the national regulations regarding security, installa- tion, and accident prevention (e.G. Din en 60079-14) as well as the safety guidelines described in this user manual and the atex install...

  • Page 10

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 10 von 24 5.2 step 2: electrical connection attention! The electrical connection of the equipment must be executed by quali- fied personnel only! Attention! It is mandatory that the housing of the excam ® series has to be grounded via a pe-co...

  • Page 11

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 11 von 24 5.2.1 potential equalization figure 5.1 potential equalization t03-va … depending on the housing execution, the equipment’s potential equalization is to be car- ried out at the place indicated in above figure. The profile of the pot...

  • Page 12

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 12 von 24 figure 5.3 excam minizoom – t03-va-b-xxx-k-l figure 5.4 excam minizoom – t03-va-b-xxx-p-n figure 5.5 excam minizoom – t03-va-b-xxx-p-l.

  • Page 13

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 13 von 24 5.2.3 power supply & protection 5.2.4 power supply & protection of the camera‘s power circuit the power supply is to be carried out via the red (rd) as well as black (bk) strand. Connection table: potential color (iec 60757) potenti...

  • Page 14

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 14 von 24 the dimensioning of the equipment or the supply protection depends on: - the selected power supply - the cable length - the national regulations the following safety recommendations may serve as a basis: supplied power length system...

  • Page 15

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 15 von 24 5.2.7 tests prior to switching on voltage attention! Prior to commissioning, all tests as indicated by the national regula- tions have to be executed. In addition, it is mandatory that the proper functioning of the operating device ...

  • Page 16

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 16 von 24 figure 5.7 fcb control panel figure 5.8 control and visualization via a video server.

  • Page 17

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 17 von 24 technical data sony fcb-ix11ap: figure 5.9 excam ® minizoom – lens and sensor board lens type motor zoom lens 10x optical zoom f=4,2mm (wide) to 42mm (tele) (f1.8 to f2.9) digital zoom 4x (40x with optical zoom) sensor ¼“ had ccd fo...

  • Page 18

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 18 von 24 5.3.1 work preparation attention! Please carry out any preoperational work carefully and in accordance with the applicable regulations. Note: depending on the zone classification (din en 60079-10), it might be necessary to obtain a ...

  • Page 19

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 19 von 24 6 maintenance / servicing / alterations the national regulations concerning the maintenance and servicing of electrical devices within hazardous areas are to be observed. The required maintenance intervals are specific to the indivi...

  • Page 20

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 20 von 24 9 drawings figure 9.1 t03-va-k1 figure 9.2 t03-va-k2.

  • Page 21

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 21 von 24 10 notes.

  • Page 22

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 22 von 24.

  • Page 23

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 23 von 24.

  • Page 24

    Doc.-id: 131106-pt03ba-ss-excam minizoom_en_rev.01, seite 24 von 24 schillerstrasse 17, 35102 lohra-altenvers www.Samcon.Eu, info@samcon.Eu fon: +49 6426 9231-0, fax: - 31.