Samcon ExCam niteZoom User Manual

Summary of ExCam niteZoom

  • Page 1

    Ex cam ® nitezoom user manual.

  • Page 2

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 2 of 24 content 1 document overview ................................................................................................. 4 2 technical data .............................................................................................

  • Page 3

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 3 of 24 table of figures figure 1.1 document overview .......................................................................................... 4 figure 5.1 potential equalization t03- va… ........................................................

  • Page 4

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 4 of 24 1 document overview figure 1.1 document overview the present document is marked in red . T03 excam series: (atex) - ex installation manual - ec declaration of conformity - ec type examination excam minizoom: - user manual - datasheet e...

  • Page 5

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 5 of 24 2 technical data 2.1 parameters of the explosion protection identification marks according to directive 94/9/eg: ii 2g (zone 1 and 2) ii 2d (zone 21 and 22) explosion protection (gas): ex d iic t6 gb or ex d iib t6 gb explosion protect...

  • Page 6

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 6 of 24 2.4 mechanical parameters housing material: stainless steel 1.4301 (aisi 304) and stainless steel 1.4305 (aisi 303) optional: stainless steel 1.4401 (aisi 316) or stainless steel 1.4404 (aisi 316l) glass material: borosilicate protecti...

  • Page 7

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 7 of 24 2.7 lens af-zoom lens: 10 x optical / 4 x digital focal distance (f): 5.1 mm to 51.0 mm angle of view: 52° (wide) to 5.4° (tele) aperture: f1,8 to f2,1 minimal illumination: 0.0004 lux (1/4 s, 1/3 s mode & icr on) recommended illuminat...

  • Page 8

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 8 of 24 3 safety guidelines please observe the safety guidelines indicated in the atex installation manual of the excam series! 4 illustration of the model key the following model options are currently available for the excam ® nitezoom: produ...

  • Page 9

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 9 of 24 5 commissioning attention! Please observe the national regulations regarding security, installa- tion, and accident prevention (e.G. Din en 60079-14) as well as the safety guidelines described in this user manual and the atex installa-...

  • Page 10

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 10 of 24 5.2 step 2: electrical connection attention! The electrical connection of the equipment must be executed by quali- fied personnel only! Attention! It is mandatory that the housing of the excam ® series has to be grounded via a pe-conn...

  • Page 11

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 11 of 24 5.2.1 potential equalization figure 5.1 potential equalization t03-va … depending on the housing execution, the equipment’s potential equalization is to be car- ried out at the place indicated in above figure. The profile of the poten...

  • Page 12

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 12 of 24 figure 5.3 excam nitezoom – t03-va-b-xxx-k-l figure 5.4 excam nitezoom – t03-va-b-xxx-p-n figure 5.5 excam nitezoom – t03-va-b-xxx-p-l.

  • Page 13

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 13 of 24 5.2.3 power supply & protection 5.2.4 power supply & protection of the camera’s power circuit the power supply is to be carried out via the red (rd) as well as black (bk) strand. Connection table: potential color (iec 60757) potential...

  • Page 14

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 14 of 24 the dimensioning of the equipment or the supply protection depends on: - the selected power supply - the cable length - the national regulations the following safety recommendations may serve as a basis: supplied power length system c...

  • Page 15

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 15 of 24 5.2.7 tests prior to switching on voltage attention! Prior to commissioning, all tests as indicated by the national regula- tions have to be executed. In addition, it is mandatory that the proper functioning of the operating device in...

  • Page 16

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 16 of 24 figure 5.7 fcb control panel of the excam nitezoom figure 5.8 control and visualization via a video server.

  • Page 17

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 17 of 24 technical data sony fcb-ex20dp: figure 5.9 excam ® nitezoom – lens and sensor board lens type motorzoom lens 10x optical zoom f=5.1 mm (wide) to 51 mm (tele) (f1.8 to f2.1) digital zoom 12x (120x with optical zoom) sensor 1/3“-super-h...

  • Page 18

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 18 of 24 5.3.1 work preparation attention! Please carry out any preoperational work carefully and in accordance with the applicable regulations. Note: depending on the zone classification (din en 60079-10), it might be necessary to obtain a wo...

  • Page 19

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 19 of 24 6 maintenance / servicing / alterations the national regulations concerning the maintenance and servicing of electrical devices within hazardous areas are to be observed. The required maintenance intervals are specific to the individu...

  • Page 20

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 20 of 24 9 drawings figure 9.1 t03-va-k1 figure 9.2 t03-va-k2.

  • Page 21

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 21 of 24 10 notes.

  • Page 22

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 22 of 24.

  • Page 23

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 23 of 24.

  • Page 24

    Doc.-id: 131106-pt03ba-ss-excam nitezoom_en_rev.01, page 24 of 24 schillerstrasse 17, 35102 lohra-altenvers www.Samcon.Eu, info@samcon.Eu fon: +49 6426 9231-0, fax: - 31.