Sami WS-2301 wearable Instruction Manual - page 2
Before you use your Sami wearable please open the following link
www.sami.es/smartwatchWS2301
Note: This application is only operative with Android devices. The IOS devices have limited functions and the connect to your
wearable only by Bluetooth.
Or if you have the QR code reader already installed on your smart phone scan the below code
FUNCTION AND KEY DESCRIPTION:
1. Battery. The WS-2301 comes with a built in lithium polymer battery of 150 mAh. It is recomending to charge the battery completly before
use by means of the micro USB cable (included). The charging time is between 2~3 hours and stand by time is 72 hours. The icon on the
OLED display indicates the level of charge. In case of low battery the bracelet will emit a warning sound and will automatically shut down.
2. Switch on/off. Keep the key K1 pressed until you see "POWER ON" on the display. The weareable will automatically display the time after a
few seconds. Similarly, to switch off the display keep the K1 key pressed for a few seconds.
3. Menu functions. Once switched on, long press the key K2 to enter the main menu, which includes adjust time, access phone book and
languages selection. Short press key K2 to select any one of the above functions. To exit the menu function, long press key K2 and time will
be display on the screen.
· Setting the time. Long press key K2 to enter the main menu. Short press key K2 to select time setting. Once selected, short press key
K1 to adjust hours. Then press key K2 to adjust minutes. Long press key K2 to come out from the time setting function.
· Phone book functions. Long press key K2 to enter the main menu, short press key K2 to select phone book functions. Once
selected a message will apear on your mobile requesting access to all contacts of your phone book. Click (OK) to allow access (ensure that
the wearable and your smart phone are connected by Bluetooth). This will start download of data on your smart bracelet. The display of the
bracelet will show "SYNC COMPLETE". In case there is an error during download the OLED screen will display an error message.
· Language selection. Follow the same steps as in the above two options to choose the language select function. You select the
languange prefered.
4. Pairing. press key 1 for 6 seconds until you see "PAIRING" appear on the display. The wearable will first display "POWER ON" and then
"PAIRING". Activate the Bluetooth function on the mobile, start search for device and once you see "WS-2301", confirm pairing and enter the
pasword "0000".
5. Answering calls. Press either key "K1/K2" to acept or end a call. To reject the call long press "K1/K2". To redial the last number double click
on K1.
6. Reproducing music. Once sincronization between the smart phone and wearable has taken place succesfully the musicn fiels from your
phone can be reproduced and heard through the speaker of the wearable. Short press key K1 to reduce the volume and short press key K2
to increase it.
7. Anti lost function. the wearable has a anti lost function which gets activated when the distance between your smart phone and the
bracelet is more than 10 m. The wearable start vibrating and a message appears on the display indicating loss of conexion between the two
devices.
Besides the above functions the wearable comes with alarm clock, sms alert and displays the number and name of incoming calls.
· Warning: Between the two operative systems android and iOS, there is a possibility that some of the features of the wearable do not function
as they should with the iOS. It is important to mention that smart phones use different versions of the android operation system and there is a
probability that all the features of the wearable may not function optimally.
TECHNICAL SPECIFICATIONS:
Display screen: 0.91 " OLED
Screen resolution: 128x32 pixels.
Charge I/O port: Micro USB 5 pin.
Battery: Built in Li-Polymer 150 mAh
Stand by time: 120-150 hours
Charging time: 2~3 h
Current. 200 mAh