Samick DCP-8 Manual - Factory Reset

Factory Reset

Performing a Factory Reset will clear all battery backed memory and restore all 

functions to their factory defaults, just like they were when you used this piano for 

the first time. 

Please note that anything you have recorded in the Song Recorder will be erased 

by this procedure!

1. Turn the Power Off.

2.Hold down the [Reverb] and [Voice/Function] buttons while powering on the piano.

ON/OFF

PIANO

RESET

Reverb

Voice / -

Function

The LED Display will light ALL segments, and all LEDs on the device will light 

while these buttons are held down. Once this has happened, you can release the 

Reverb and Voice/Function buttons.

When the Reverb and Voice/Function buttons are released, this piano will return to 

Performance Mode (ready-to-play). All button LEDs will return to their default states. 

The LED Display will show the version number of the firmware(thepiano's internal 

operating software) for 2 seconds and then return to showing the Voice Name 

(Grand Piano - Pno). 

The DCP-8 will be back to its default state as if powered on for the first time.

55