Samick SSP12 Owner's Manual - page 6

SSP12

6 

POWER SUPPLY 

Plug the DC output cable from the power adapter into DC IN jack in the rear panel of your 

instrument, then plug the AC cable of your power adapter into a convenient wall AC power socket. 

Turn on the instrument by pressing the POWER ON/OFF switch located in the back panel.  Set the 

MASTER VOLUME to the desired level.  The MASTER VOLUME controls the  

overall volume for the entire instrument. 

USING HEADPHONES OR AN EXTERNAL SOUND SYSTEM  

A standard stereo headphone can be plugged into the PHONES socket for private practice or late-

night playing. The internal speaker system is automatically switched off, when the headphone is 

plugged into the PHONE socket.  There are two sockets available in the rear panel and allow the 

use of two headphone at the same time. 

The LINE OUT (Left and Right) sockets can be used to deliver the output of the sound to an 

external amplifier, stereo sound system, mixing console or tape recorder. 

SUSTAIN PEDAL (supplied)  

The 

 is supplied with a Sustain pedal. 

Connect it to the Pedal Input number 2 to obtain the Sustain effect when used. It has the same  

function as the ''sustain''   pedal on the piano.   

It provides sustain and lets the sound slowly decay after the keys have been  released. 

SOFT/SOSTENUTO/SUSTAIN PEDAL (optional)  

If necessary the SSP12  can be used with an optional 3 Pedals pedal board

.  

Insert the mono jack  to the  Pedal Input number 1 and the stereo jack  in the Pedal Input  2. 

The instrument  works now with a set of three pedals giving the following functions: 

SOFT:        

gives the piano voices a ''softer'' sound.  

SOSTENUTO:   

this allows  only the notes pressed on the keyboard before the Sostenuto pedal 

is activated to sustain and no subsequent notes played afterwards.  

SUSTAIN:    

has the same function as the ''sustain''   pedal on the piano.  It provides sustain 

and lets the sound slowly decay after the keys have been  released.