Samil Power UL3-10K WIFI User Manual

Page of 8

Download

Print this page

Bookmark us

User Manual for UL3-10K WIFI

User Manual for UL3-10K WIFI

Table of Contents

1. Initialize WIFI Module ....................................................................................................... 2

2. WIFI Parameters Setting .................................................................................................... 3

3. Get IP Address of WIFI ...................................................................................................... 7

4. Problems & Solutions ........................................................................................................ 8

1 2 3 4 5 6 7 Next › »

Summary of UL3-10K WIFI

Page 1
User manual for ul3-10k wifi user manual for ul3-10k wifi table of contents 1. Initialize wifi module ....................................................................................................... 2 2. Wifi parameters setting ....................................................................
Page 2
User manual for ul3-10k wifi 1. Initialize wifi module it’s necessary to initialize wifi module before wifi settings. The method is showed as below: press these 3 buttons at the same time esc ▲ ▼ initialize wifi parameters？ ok e wifi reset wifi initialize ok.
Page 3
User manual for ul3-10k wifi 2. Wifi parameters setting 2.1 after initializing wifi module, you can search a wireless network named hf-lpb100 or hf-lpb with a laptop. This network can be connected directly without any password, and connect it please. 2.2 input the ip address 10.10.100.254 in your br...
Page 4
User manual for ul3-10k wifi 2.3 click “ sta setting ” and set as follow: (a) input the network name and password of your router. (b) make it enable to obtain an ip address automatically. (c) click “ save ” to save the settings. (note: don’t restart after saving successfully, please click “ back ” t...
Page 5
User manual for ul3-10k wifi 2.4 click “ other setting ” and set network parameters base on the monitor you choose. (1) if you choose to use local monitor , please set as follow: protocol：tcp-server port id: 60000 tcp time out setting：300 click “ save ” below the page to save settings. (note: don’t ...
Page 6
User manual for ul3-10k wifi 2.5 click “ work mode ”, select “ sta mode ”, and then click “ save ”. (note: don’t restart after saving successfully, please click “ back ” to do following settings.).
Page 7
User manual for ul3-10k wifi 2.6 go to the “ restart ” page and click “ ok ” to restart. So far, settings of wifi parameters are finished. 3. Get ip address of wifi after having finished setting wifi parameters, user can get current ip address of wifi through the lcd of inverter. It means that the c...
Page 8
User manual for ul3-10k wifi 4. Problems & solutions 4.1 failed to establish connection between wifi module and router. Solution: when the ip address you get from lcd is 0.0.0.0, please restart the power of inverter and try to read ip address again. If it still doesn’t work, maybe the ssid or passwo...