Samlexpower PST-1000-12 Owner's manual - Section 9 |
SAMLEX AMERICA INC. | 37
SECTION 9 |
Operation
No Load Draw (Idle Current)
When the 0/0''TXJUDIJTUVSOFEPOBMMUIFDJSDVJUSZJOTJEFUIFJOWFSUFSCFDPNFTBMJWF
BOEUIF"$PVUQVUJTNBEFBWBJMBCMF*OUIJTDPOEJUJPOFWFOXIFOOPMPBEJTCFJOHTVQ-
QMJFEPSJGBMPBEJTDPOOFDUFECVUIBTCFFOTXJUDIFEOFFUIFJOWFSUFSESBXTBTNBMM
BNPVOUPGDVSSFOUGSPNUIFCBUUFSJFTUPLFFQUIFDJSDVJUSZBMJWFBOESFBEZUPEFMJWFS
the required power on demand. This is called the "idle current" or the "no load draw".
)FODFXIFOUIFMPBEJTOPUSFRVJSFEUPCFPQFSBUFEUVSOOFF the 0/0'' switch on
the inverter to prevent unnecessary current drain from the battery.
i
INFO
8IFOUIFJOWFSUFSJTUVSOFE0''VTJOHUIFPQUJPOBM3FNPUF$POUSPM3$"
some control circuitry in the inverter is still alive and will draw very low current.
5IFSFGPSFUPQSFWFOUBOZESBJOGSPNUIFCBUUFSZTXJUDI0''UIFJOWFSUFSGSPN
UIF0/0''TXJUDIQSPWJEFEPOUIFGSPOUQBOFMPGUIFJOWFSUFS