Samlexpower PST-120-12 Owner's manual - Section 3 |
6 | SAMLEX AMERICA INC.
seCtIOn 3 |
Installation & Operation
inStALLAtion & oPeRAtion
- ensure installation clearances are as shown in fig. 3.1 above for proper cooling.
- A detachable 2' DC input power cord (7, fig. 2.3) has been provided.
- This unit does not have a power oN/off switch. The unit will switch oN automatically as soon
as 12 VDC power is fed from the battery through the 12V plug adaptor (8, fig. 2.3).
- Connect the detachable DC input power cord (7, fig. 2.3) by sliding the mating
battery Modular connector (10, fig. 2.3) into the DC input connector (6, fig. 2.2).
- Plug in the 12V Plug Adaptor (8, fig. 2.3) of the DC input cord into the 12V outlet of the
battery supply.
- When the LeD Status Indicator (2, fig. 2.1) is GreeN, the inverter's AC outlet (3, fig. 2.1) and
USb port (1, fig. 2.1) will have voltage outputs.
- Insert plug of your electrical appliance into the AC outlet (3, fig. 2.1) of the inverter.
- remove the inverter from the 12V outlet when not in use. This will prevent unnecessary drain
from the battery.
Cooling Slots
Cooling Slots
Fig. 3.1: Installation Clearances