Samlexpower PST-15S-12A Owner's Manual - page 6
Page 6
INSTALLATION & MAKING CONNECTIONS
1
115V AC output
2
LED indicator
3
On/Off switch
4
Cigar Lighter Plug
(back of unit -not shown)
5
Grounding lug
(back of unit - not shown)
2
1
3
CAUTION!
Reverse polarity of input connection will blow
the fuse inside the inverter and may cause
permanent damage. Ensure that the cigar
lighter socket used for powering the inverter
has the correct polarity with respect to the
cigar lighter plugs, positive (+) & negative (-)
contact points. The contact at the tip of the
cigar lighter plug is positive(+) and the two
spring loaded bow type contacts on the sides
are negative(-).
Damage due to reverse
polarity is not covered by warranty.
4.1
Ensure that the power ON/OFF switch is turned off.
4.2
Place the inverter in a dry, clean, cool & ventilated space.
4.3
Insert the cigar lighter plug into the cigar lighter socket
of the vehicle. In some vehicles, it may be necessary to turn
the ignition key to ON or ACCESSORY to feed power to
the cigar lighter socket. The bow type side contacts of the
cigar lighter plug is the negative (-) and the center tip is the
positive(+)
4.4
Ground the inverter using the Grounding Lug at the rear
of the unit.