Samlexpower SAM-100-12 Owner's Manual - Section 1 |
seCtIOn 1 |
safety
5. Loose connectors may cause overheated mating surfaces and melted insulation.
6. remove the unit from the 12V Power outlet when not in use.
the unit should only be used in locations that meet the following criteria:
dry – Do not allow water and/or other liquids to come into contact with the unit.
cooL – Ambient air temperature should be between 0ºC to 40ºC. Do not place the
unit on or near a heating vent or any piece of equipment which is generating heat
above room temperature. Keep the unit away from direct sunlight.
ventILated – Keep the area surrounding the unit clear to ensure free air circulation
around the unit. Do not place items on or over the unit during operation. If the unit
over-heats, unplug it and let it cool down for 30 minutes.
Safe – Do not use the unit near flammable materials or in any locations that may ac-
cumulate flammable fumes of gases.