Remote control model: sam-rc please read this manual before operating your remote control. Owner's manual.
2 general information layout and operation of controls and led indications model sam-rc inverter remote push low input voltage warning output output fault input fault on/off battery full high 4.4 4.3 4.2 4.1 6.3 3 1 2 6.2 6.1 5.1 5.2 7 8 9 1. On / off push button. Used to switch on and switch off th...
2 general information note: the white led backlighting will be on even when the main on / off button on the inverter is in the off condition (provided dc input voltage from the battery is available at the dc input terminals of the inverter). 3. Green led showing on / off status of the remote control...
2 general information -led 6.1 and 6.2 are lighted: power drawn by the load is 60% to 79% the rated output power of the inverter -led 6.1, 6.2 and 6.3 are lighted: power drawn by the load is 80% to 100% of the rated output power of the inverter note: when the green led 5.1 is lighted, it indicates t...
3 operation 4 specifications the remote control is provided with 3 meter length of cat 5 networking cable with 8p8c (8 position, 8 conductor) modular plugs (rj-45) on either ends . Plug one end of the cable to the receptacle on the remote control. Locate the 8p8c (8 position, 8 conductor) modular re...
