SamplexPower SCC-1208L Owner's Manual - Section 3 |
8 | SAMLEX AMERICA INC.
SAMLEX AMERICA INC. | 9
Accessories provided
for installation
6piecesofTwist-onWireNutconnectors
havebeenprovidedforconnectionof
input and output wiring.
First,inserttwowirestogetherintocon-
nectorcap,andthenturnthecapuntilthe
two wires twisted tightly. follow sequence
1to4showninthepicturesgivenbelow.
Layout of input and
output connections
Thelayoutofthevariousinput/output
wires is shown in fig. 3.1 below:
Fig 3.1 Legend:
1. Yellow wire PV +
Connects to the Positive terminal of
the Solar Panel
2. Black wire PV -
Connects to the Negative terminal of the
Solar Panel
3. Red wire Bat +
Connects to the Positive terminal of the battery
through a 10 A fuse
4. Black wire Bat -
Connects to the Negative terminal of the battery
5. White wire Load +
Connects to the Positive terminal of the load
(DC lamp) for Night Light Function
6. Black wire Load -
Connects to the Negative terminal of the load
(DC lamp) for Night Light Function
7. Blue wire Wet type battery
Is not connected if the battery is sealed type
(AGM). Is connected to the Bat – (4) if the battery
is Flooded / Wet Cell type
8. External fuse, 32 V, 10 A
SeCtIOn 3 |
Installation & Operation
Figure 3.1:
Layout & Installation Diagram
1 2 3 4 5 6 7
8
earth Ground
PVPanel
DCLamp
Lead Acid battery
PV+
PV-
Bat+ bat- Load+ Load-
WetType
battery