Samson DMS80 Owner's Manual

Manual is about: DESKTOP MONITOR SYSTEM STEREO 40W X 2 MIXER FULL RANGE SPEAKERS

Summary of DMS80

  • Page 1

    ® owners manual dms80 desktop monitor system stereo 40w x 2 mixer f u l l r a n g e s p e a k e r s.

  • Page 2

    English introduction 3 features 4 operating notes 5 controls and functions 6 installation 11 troubleshooting 13 specifications 14 francais introduction 15 description 16 notes d’utilisation 17 rÉglages et fonctions 18 installation 23 assistance technique 25 caractÉristiques techniques 26 deutsche ei...

  • Page 3

    Thank you for purchasing the samson dms80 desktop monitor system. The dms80 is a compact true high fidelity sound system. The da80, a highly advanced stereo amplifier and the m40 full range speakers were developed specifically for use with keyboard setups, project studios, and computer multimedia sy...

  • Page 4

    F e a t u r e s features: • da80 amplifier produces 40 watts per channel into 8 ohms • extremely compact (1.6 ″ / 41mm h) all metal amplifier chassis is strong enough to support up to 40 lbs (18kg) • stereo 5-band graphic equalizer with in/out switch • led level meters • mono sub-woofer line out (le...

  • Page 5

    • do not connect speakers and turn on power until you have read this manual thoroughly. • while unpacking the dms80 inspect all items for quality of appear- ance and physical damage. If shipping damage has occurred, immediately notify your dealer. • the dms80 has been specially designed with vents p...

  • Page 6

    1. Power switch depress the power switch to turn the da80 on. The power led indicator will light when the power is on. Release the power switch to turn the da80 off. 2. Master volume control the master volume control regulates the signal level of the line input, aux/cd input and mic/inst. Input to t...

  • Page 7

    60hz: boost to bring out kick drum, bass guitar or to add more low end “punch” to a mix. Cutting this frequency can help clean up a muddy sound. 250hz: adjusts the mid bass range. Boost to add “warmth” to vocals and strings. The cello and the low strings of a rhythm guitar fall into this range. Cut ...

  • Page 8

    9. Mic/inst. Switch depress the mic/inst. (microphone/instrument) switch to its on position to select the audio signal from the mic/inst. Inputs. Release the mic/inst. Switch to its off position to mute the audio signal from the mic/inst. Inputs.This is used in combination with the mic/inst. Level c...

  • Page 9

    C o n t r o l s a n d f u n c t i o n s 9 rear panel 1 7 6 5 4 3 2 speaker outputs left+ left- right+ right- speaker impedance 8 Ω line in aux/cd in samson desktop monitor system stereo 40w x2 model:da80 line out sub out serial number risk of electric shock do not open warning do not expose this equ...

  • Page 10

    Note: signals to the line in will be amplified only when the line switch on the front panel is depressed to its on position. 3. Aux/cd in the aux/cd in jacks accept audio signal input from any external cd or cd rom player, stereo receiver, audio mixer, video board or vcr. Note: signals to the aux/cd...

  • Page 11

    Note: please read the operating notes section (pg. 4) of this manual before connection or attempting to operate the dms80. 1. Unpack the dms80. Find a secure place where the da80 and m40 speakers will be used. The da80 amplifier is strong enough to sup- port 40 lbs. (18kg) and can be placed under a ...

  • Page 12

    12 i n s t a l l a t i o n 4. Before connecting the da80 to an ac outlet, make sure the power switch is off (out position) and the master volume and mic/inst. Level controls are rotated completely counter-clock- wise. Connect the “iec” cord to the ac input on the rear of the da80 and to a grounded a...

  • Page 13

    • no sound. Power led is not lit. Reinsert the power cord of the unit into an alternate outlet. If the power outlet is good, unplug the da80 from the outlet and check the fuse. If the fuse is blown, replace it with a standard f3a miniature fuse (5mm x 20mm) for 115v systems or t2a for 230v systems. ...

  • Page 14

    Da80: nominal signal levels line in: -10dbu aux/cd in: -10dbu mic/inst. In: -50dbu line out: -10dbu total harmonic distortion: 0.05% at 1khz input impedance line, aux/cd in: 10k ohms mic/inst. In: >1meg Ω graphic eq: (60hz, 250hz, 1khz, 3.5khz, 12khz) ±12 db power rating (per channel): 40 watts into...

  • Page 15

    Nous tenons à vous remercier de la confiance que vous nous témoignez en choisissant le système d’écoute dms80 de samson. Le dms80 est un système compact de reproduction sonore haute fidélite. Le da80, un amplificateur stéréo très sophistiqué, et les enceintes large bande m40 ont été spécialement con...

  • Page 16

    D e s c r i p t i o n description : • l’amplificateur da80 délivre 40 watts par canal dans 8 ohms. • le boîtier métallique extrêmement compact de l’amplificateur (sa hauteur est de 41 mm) peut supporter un poids de 18 kg. • correcteur graphique stéréo 5 bandes avec touche de mise en/hors ser- vice. ...

  • Page 17

    • ne connectez pas les enceintes et ne mettez pas l’appareil sous tension avant d’avoir lu ce manuel attentivement. • lorsque vous sortez le dms80 de son emballage, vérifiez que l’appareil n’a subi aucune dégradation pendant le transport. Le cas échéant, signalez-le immédiatement à votre revendeur. ...

  • Page 18

    1. Interrupteur d’alimentation appuyez sur l’interrupteur d’alimentation pour mettre le da80 sous tension. Le témoin de mise sous tension s’allume. Appuyez de nouveau sur cet interrupteur pour mettre le da80 hors tension. 2. RÉglage de volume gÉnÉral le réglage de volume général détermine le niveau ...

  • Page 19

    60hz : accentuez cette fréquence pour mettre en valeur la grosse caisse, la guitare basse ou pour donner plus de punch dans les basses à votre mixage. Atténuez-la pour améliorer la clarté sonore globale. 250hz : permet de régler les bas médiums. Accentuez cette fréquence pour ajouter de la chaleur à...

  • Page 20

    9. Touche mic/inst. Appuyez sur la touche mic/inst. (microphone/instrument) pour sélection- ner l’entrée micro/instrument. Appuyez de nouveau sur la touche mic/inst. Pour la désactiver et ainsi couper le signal. Cette touche est utilisée en combinaison avec le réglage du niveau micro/instrument (voi...

  • Page 21

    R É g l a g e s e t f o n c t i o n s 21 face arrière 1 7 6 5 4 3 2 speaker outputs left+ left- right+ right- speaker impedance 8 Ω line in aux/cd in samson desktop monitor system stereo 40w x2 model:da80 line out sub out serial number risk of electric shock do not open warning do not expose this eq...

  • Page 22

    Remarque : les signaux des entrées line in ne sont amplifiés que lorsque la touche line de la face avant est activée. 3. EntrÉes aux/cd les connecteurs aux/cd in acceptent un signal audio de tout lecteur de cd ou de cd rom, récepteur stéréo, console de mixage, carte son ou magnétoscope. Remarque : l...

  • Page 23

    Remarque : veuillez lire le chapitre concernant les notes n’utilisation en page 4 de ce manuel avant de connecter ou de tenter d’u- tiliser le dms80. 1. Dépaquetez le dms80. Trouvez un lieu sûr où placer le da80 et les enceintes m40. L’amplificateur da80 est assez robuste pour supporter un poids de ...

  • Page 24

    24 i n s t a l l a t i o n 4. Avant de connecter le da80 à une prise secteur, assurez-vous que l’inter- rupteur secteur est désactivé (off) et que les réglages de volume général et de niveau mic/inst. Sont au minimum (dans le sens inverse des aiguilles d’une montre). Connectez le cordon secteur à l’...

  • Page 25

    • absence de son. Le témoin d’alimentation est éteint. Réinsérez le cordon d’alimentation de l’appareil dans une autre prise secteur. Si la prise secteur fonctionne, débranchez le da80 de la prise secteur et vérifiez que le fusible fonctionne correctement. Si le fusible est hors service, remplacez-l...

  • Page 26

    Da80: niveau nominal entrée ligne : -10 dbu entrée aux/cd : -10 dbu entrée mic/inst. : -50 dbu sortie ligne : -10 dbu distorsion harmonique totale : 0,05% à 1khz impedance d’entrée entrées line, aux/cd : 10 k ohms entrée mic/inst. : >1 mohm correcteur raphique : (60 hz, 250 hz, 1 khz, 3., khz, 12 kh...

  • Page 27

    Wir danken ihnen, daß sie sich für das samson desktop monitor system entschieden haben. Der dms80 ist ein kompaktes high-fidelity tonwiedergabe- system. Der da80 ist ein hochentwickelter stereo-verstärker und die breitband- lautsprecher m40 sind speziell für die benutzung von keyboard-anlagen, in en...

  • Page 28

    B e s c h r e i b u n g beschreibung : • der verstärker da80 liefert 40 watt pro kanal in 8 ohm. • das kompakte metallische gehäuse des verstärkers (41 mm hoch) kann 18 kg aushalten. • 5-bändiger stereo graphic equalizer mit einer ein- und ausschaltungstaste. • led-pegelanzeige. • mono line ausgang ...

  • Page 29

    • verbinden sie nicht die lautsprecher, und schalten sie das gerät nicht an, bevor sie nicht dieses handbuch gründlich durchgelesen haben. • wenn sie den dms80 auspacken, untersuchen sie das gerät auf äußere beschädigung. Wenn das gerät während des transportes beschädigt wurde, geben sie sofort ihre...

  • Page 30

    1. Netzschalter betätigen sie den netzschalter, um den da80 einzuschalten. Die netzbetrieb-led leuchtet auf. Betätigen sie erneut diese taste, um den da80 auszuschalten. 2. LautstÄrke-regelung der hauptlautstärker-regler bestimmt die signalpegel der line-, aux/cd- und mikro/instrument-eingänge, sowi...

  • Page 31

    60hz : heben sie diese frequenz zur unterstreichung des kesselpauken- oder baß-gitarrenklangs an, oder um in ihrer tonmischung den tiefen mehr ”punch” zu geben. Schwächen sie sie zur verbesserung der allgemeinen klangklarheit ab. 250hz : ermöglicht die tieferen mitteltöne zu regeln. Heben sie diese ...

  • Page 32

    9. Mic/inst.-taste. Betätigen sie die mic/inst.-taste (mikrofon/instrument) zur einstellung des mikro/instrument-eingangs. Betätigen sie die mic/inst.-taste erneut, um den eingang abzuschalten und das signal zu unterbrechen. Diese taste wird gleichzeitig mit dem mikro/instrument-pegelregler benutzt ...

  • Page 33

    E i n s t e l l u n e g n u n d f u n k t i o n e n 33 die rückseite 1 7 6 5 4 3 2 speaker outputs left+ left- right+ right- speaker impedance 8 Ω line in aux/cd in samson desktop monitor system stereo 40w x2 model:da80 line out sub out serial number risk of electric shock do not open warning do not...

  • Page 34

    Bemerkung : die line in eingangssignale sind nur verstärkt, wenn die taste line auf der vorderseite betätigt wurde. 3. Aux/cd-eingÄnge die aux/cd in eingänge nehmen audio-signale jedes cd- oder cd rom- spielers, stereoempfängers, mischpults, soundkarte oder videorecorder an. Bemerkung : die aux/cd i...

  • Page 35

    Bemerkung : lesen sie die bedienungsanweisungen (s.4) dieses handbuches, bevor sie den dms anschließen oder ver- suchen ihn zu bedienen. 1. Packen sie den dms80 aus. Finden sie einen geschützten platz für die benutzung des da80 und den lautsprechern m40. Der verstärker hält 18 kg aus und kann wenn e...

  • Page 36

    36 a u f b a u u n d a n s c h l u s s 4. Bevor sie den da80 an das stromnetz anschließen, versichern sie sich, daß der netzschalter auf off steht, und daß die lautstärkeregelungen und die mic/inst. Pegel heruntergedreht sind (im gegenuhrzeigersinn). Schließen sie das netzkabel an einen adäquaten wa...

  • Page 37

    • kein ton ist zu hören. Die netzbetrieb-led leuchtet nicht. Stecken sie das netzkabel des gerätes in einen anderen wandanschluß. Falls der netzanschluß in ordnung ist, stöpseln sie den gerätestecker aus dem wandanschluß, und untersuchen sie, ob die sicherung funktionniert. Falls die sicherung gesch...

  • Page 38

    Da80: nennpegel line eingang : -10 dbu eingang aux/cd : -10 dbu eingang mic/inst. : -50 dbu line ausgang : -10 dbu klirrfaktor : 0,05% à 1khz eingangsimpedanz engänge line, aux/cd : 10 k ohm eingang mic/inst. : >1 mohm graphic equalizer : (60 hz, 250 hz, 1 khz, 3., khz, 12 khz) ±12 db leistung pro k...

  • Page 39

    Muchas gracias por adquirir el sistema de monitores de sobremesa samson dms80. El dms80 es un sistema compacto de sonido de alta fidelidad real. El da80, un amplificador stereo de última generación y los altavoces de rango total m40 han sido desarrollados específica- mente para su uso en montajes de...

  • Page 40

    C a r a c t e r i s t i c a s características: • el amplificador da80 produce 40 watios por canal a 8 ohmnios • un amplificador extremadamente compacto (41mm h) con un chasis totalmente metálico capaz de soportar un peso de hasta 18 kg • ecualizador gráfico stereo de 5 bandas con interruptor in/out ...

  • Page 41

    • no conecte los altavoces ni encienda el sistema hasta que no haya leído completamente este manual. • mientras desembala el dms80 compruebe el aspecto exterior de todos los artículos incluidos por si hubiese cualquier daño físico. Si se hubiese producido un daño durante el transporte, notifíqueselo...

  • Page 42

    1. Interruptor de encendido pulse el interruptor power para encender el da80. El indicador led power se iluminará cuando la unidad esté encendida. Suelte el interruptor power para apagar el da80. 2. Control de volumen master o principal el control master volume regula el nivel de señal de las entrad...

  • Page 43

    60hz: el realce hace sobresalir el bombo, bajo o añade más "pegada" de graves a una mezcla. El corte de esta frecuen- cia le puede ayudar a aclarar un sonido algo oscuro. 250hz: ajusta el rango medio grave. El realce añade "calor" a las voces y cuerdas. El chelo y las cuerdas graves de una guitarra ...

  • Page 44

    9. Interruptor mic/inst. Pulse el interruptor mic/inst. (micrófono/instrumento) a la posición on para elegir la señal audio de las entradas mic/inst. Deje este interruptor en off para anular la señal de esas entradas. Esto se usa en combinación con el control mic/inst. Level (vea 11 luego). 10. Medi...

  • Page 45

    C o n t r o l e s y f u n c i o n e s 45 panel trasero 1 7 6 5 4 3 2 speaker outputs left+ left- right+ right- speaker impedance 8 Ω line in aux/cd in samson desktop monitor system stereo 40w x2 model:da80 line out sub out serial number risk of electric shock do not open warning do not expose this e...

  • Page 46

    Nota: las señales que van a line in solo serán amplificadas cuando el interruptor line del panel frontal sea colocado en on. 3. Aux/cd in estos conectores aceptan entradas de señal audio que vengan de reproductores cd o cd rom exteriores, receptores stereo, placas de video, mesas de mezclas o vcr. N...

  • Page 47

    Nota: lea la sección de notas operativas (pg. 4) de este manual antes de conectar o intentar utilizar el dms80. 1. Desembale el dms80. Coloque el da80 y los altavoces m40 en un lugar seguro y estable. El amplificador da80 puede soportar hasta 18 kg de peso y se puede colocar bajo un monitor de orden...

  • Page 48

    48 i n s t a l a c i o n 4. Antes de conectar el da80 a una salida de corriente, asegúrese que el interruptor power está apagado (fuera) y que los controles master volume y mic/inst. Level están girados completa- mente a la izquierda. Conecte el cable “iec” a la entrada ac input de la parte trasera ...

  • Page 49

    • no hay sonido. El piloto power no está encendido. Vuelva a colocar el cable en una salida de corriente distinta. Si la sali- da está bien, desconecte el da80 de la toma y compruebe el fusible. Si hubiese saltado, sustitúyalo por otro standard mini f3a (5mm x 20mm) para sistemas de 115v o un t2a pa...

  • Page 50

    Da80: niveles de señal nominales entrada línea: -10dbu entrada aux/cd: -10dbu entrada mic/inst.: -50dbu salida línea: -10dbu distorsión armónica total: 0.05% a 1khz impedancia de entrada entrada línea, aux/cd: 10k ohms entrada mic/inst.: >1meg Ω eq gráfico: (60hz, 250hz, 1khz, 3.5khz, 12khz) ±12 db ...

  • Page 51

    575 underhill blvd., po box 9031, syosset, new york 11791-9031 phone: 1-800-3samson (1-800-372-6766) fax: 1-516-364-3888 www.Samsontech.Com ® samson cares about the environment..