1. DL manuals
  2. Samson
  3. Speakers
  4. Expedition XP112a
  5. Owner's Manual

Samson Expedition XP112a Owner's Manual - Features

Summary of Expedition XP112a

  • Page 1

    Xp112a xp115a owner's manual.

  • Page 2

    Copyright 2014, samson technologies corp. V1.1 samson technologies corp. 45 gilpin avenue hauppauge, new york 11788-8816 phone: 1-800-3-samson (1-800-372-6766) fax: 631-784-2201 www.Samsontech.Com if you want to dispose this product, do not mix it with general household waste. There is a separate co...

  • Page 3: Important Safety Information

    1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. This apparatus shall not be exposed to dripping or splashing liquid and no object filled with liquid, such as a vase, should be placed on the apparatus. 6. Clean only with a dry cloth. 7. Do ...

  • Page 4: Introduction

    Thank you for purchasing the samson expedition professional, powered loudspeaker. The expedition xp112a and xp115a are compact and powerful speaker cabinets featuring 500 watts of bi-amped onboard power. The expedition xp112a and xp115a, respectively, feature 12” and 15” heavy-duty, long-excursion w...

  • Page 5: Features

    Features here is a look at some the features of the expedition powered loudspeakers: • 500 watt, two-way active loudspeakers for live sound applications • ultra-wide, flat frequency response • custom-designed, heavy-duty, 12”/15” long throw low frequency drivers provide enhanced bass response • 1” n...

  • Page 6: Quick Start

    Quick start the following steps will help you set up your expedition xp112a/xp115a loudspeakers. 1. Turn the volume control on the rear panel fully counterclockwise. 2. Set the contour switch in the out (off) position. 3. Turn the power switch off. 4. Connect either a line-level signal from your mix...

  • Page 7: Rear Panel Layout

    Rear panel layout 1 2 3 4 5 6 7 8 9 10 1. Xlr & ¼” combo input - use this xlr / 1⁄4” input for balanced micro- phone or line level device. 2. Sensitivity switch (mic/line) - the mic position changes the gain of the input jacks from mic to line level. 3. Link output - male xlr connector used to link ...

  • Page 8: Connecting A Microphone

    Follow these steps to connect a dynamic microphone to your expedition loudspeaker: • set the expedition xp112a/xp115a power switch to the off position. • turn the volume control fully counterclockwise to the off position. • connect the power cable to an ac socket. • using a standard xlr cable, plug ...

  • Page 9

    The following steps describes connecting stereo line level signal to two expedition loudspeakers: • set the expedition xp112a/xp115a power switch to the off position. • turn the level control fully counterclockwise to the off position. • connect the power cable to an ac socket. • using standard xlr ...

  • Page 10

    Positioning the expedition xp112a/xp115a speaker placement whenever possible, it is a good idea to raise the speakers above the heads of the listening audience. The expedition enclosures feature standard 1 3/8” pole mount receptacles with locking bolts, which are compatible with speaker stands from ...

  • Page 11: Specifications

    Xp112a xp115a output power 500 watts peak (400 lf + 100 hf) 250 watts rms (200 lf + 50 hf) low frequency 12” woofer, 2” voice coil 15” woofer, 2” voice coil high frequency 1” neodymium driver, 1” voice coil frequency response 60hz - 20khz 50hz - 20khz max. Spl (1m) 119db 121db limiter optical horn c...

  • Page 12

    Samson technologies corp. 45 gilpin avenue hauppauge, new york 11788-8816 phone: 1-800-3-samson (1-800-372-6766) fax: 631-784-2201 www.Samsontech.Com.