Xp40iw xp40i portable pa systems e pedition.
Warning to prevent fire or shock hazard. Do not use this plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. To prevent fire or shock hazard. Do not expose this appliance to rain or moisture. To prevent electrical shock, match wi...
Attention: pour éviter tout risque d’électrocution ou d’incendie, ne pas exposer cet appareil à la pluie ou à l’humidité. Pour éviter tout risque d’électrocution, ne pas ôter le couvercle ou le dos du boîtier. Cet appareil ne con- tient aucune pièce remplaçable par l'utilisateur. Confiez toutes les ...
Precaucion : para reducir el riesgo de incendios o descargas, no permita que este aparato quede expuesto a la lluvia o la humedad. Para reducir el riesgo de descarga eléctrica, nunca quite la tapa ni el chasis. Dentro del aparato no hay piezas susceptibles de ser reparadas por el usuario. Dirija cua...
Copyright 2010, samson technologies corp. Printed january, 2010 v1. Samson technologies corp. 45 gilpin avenue hauppauge, new york 11788-8816 phone: 1-800-3-samson (1-800-372-6766) fax: 631-784-2201 www.Samsontech.Com.
Table of contents introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 -2 xp40i and xp40iw features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 xp40i and xp40iw front and top views . . . . . . . . . . . . . . . . . . . . . . . ....
1 introduction thank you for purchasing the expedition xp40i all-in-one, portable sound system from samson technologies. The xp40i is a compact pa system ideal for use in a variety of live sound applications. The xp40i is loud and clear, producing a big sound in a surprisingly small package. The sel...
2 this manual covers both the xp40i and xp40iw models and it should be assumed that the features are identical unless otherwise stated. In these pages, you’ll find a detailed description of the features of the xp40i and xp40iw pa systems, as well as a guided tour through their control panels, step-b...
3 • the xp40iw and xp40i are 2-way self-powered 40-watt speaker systems. • a deep and rich low frequency response is produced thanks to the proprietary six-inch, heavy-duty woofer. • built-in ipod dock for great sounding, easy playback of just about any ipod model with 30-pin standard connector. • a...
4 xp40i and xp40iw front and top views monitor 1 2 3 4 6 5 8 7 front view 1 titanium tweeter – a 1-inch (25mm), titanium diaphragm horn loaded tweeter produces an articulate and sweet high frequency response. 2 controlled dispersion horn – 1 inch throat, 60 x 60 degree wide dispersion horn provides ...
5 xp40i rear view 1 6 7 8 9 10 12 13 11 2 3 4 5 1 level (ch 1) – used to control the level of the channel 1 input. 2 level (ch 2) – used to control the level of the channel 2 input. 3 ipod level- used to control the level of the ipod input. 4 bass - controls the low band of the channel equalizer, +/...
6 xp40iw rear view 1 7 8 9 10 11 12 14 15 13 2 3 4 5 6 1 level (ch 1) – used to control the level of the channel 1 input. 2 level (ch 2) – used to control the level of the channel 2 input.. 3 rf led - illuminates when an rf signal is detected. 4 level (wireless) – used to control the level of the wi...
7 in the following pages of this manual, you will find a detailed explanation of all the xp40i and xp40iw’s functions and controls, but if you just want to get started quickly you can follow the steps below. Using a microphone • be sure that the xp40i’s power switch is set to the off position. • tur...
8 xp40i and xp40iw quick start 1 7 8 9 10 11 12 14 15 13 2 3 4 5 6 xp40i and xp40iw - ipod playback your expedition xp40i system has many sophisticated features, but if you just want to play music from your ipod, you can follow the simple steps below to get started. • unpack the xp40i or xp40iw syst...
9 microphone positioning - how to reduce feedback feedback is the annoying howling and squealing that is heard when the microphone gets too close to the speaker and the volume is high. You get feedback when the microphone picks up the amplified signal from the speaker, and then amplifies through the...
10 making connections connecting to the line level input use these inputs to connect a high impedance microphone, keyboard, guitar (with a pick-up), or any other line or instrument level signals. Use a standard shielded instrument cable terminated with ¼-inch phone plug to make your connection. Conn...
11 setting the eq for music if you are using the xp40i or xp40iw for music playback turn up the bass and treble slightly to produce a “hi-fi” frequency response that accentuates the low and high range. Setting the eq for vocal if you are using your xp40i with a microphone for speech only you and red...
12 charging the xp40i and xp40iw the xp40i and xp40iw have an internal gel cell battery allowing you to use the sound system without a power cord for up to four hours. Your actual battery life will depend on what your application is. For example, if you use the xp40i to play back loud disco music, t...
13 using link to connect two xp40i’s to use two xp40i’s as one system is simple. Just connect each side a standard ¼-inch shielded instrument cable to the link jack located on the xp40i’s rear panels. Both mixers and the microphones or instruments connected to each of the individual xp40i’s will be ...
14 using link to connect two xp40iw's to use two xp40iw’s as one system, just connect each side using a standard, ¼-inch, shielded instrument cable to the link jack located on the xp40iw’s rear panels. Both mixers and the microphones (including the wireless microphone) or instruments connected to ea...
15 1: audio on-off switch - when set to the “on” position, audio signal is transmitted. When set to the “off” position, the audio signal is muted. Because the carrier signal remains during muting, no “pop” or “thud” will be heard. Note that turning this off does not turn off the transmitter power—it...
16 using the xp40iw wireless microphone the basic procedure for setting up and using your xp40iw wireless system takes only a few minutes: 1. For the xp40iw system to work correctly, both the receiver and transmitter must be set to the same channel. Remove all packing materials (save them in case of...
17 using the xp40iw wireless microphone reduce the chance of feedback. In general, you can avoid feedback by taking care not to use any microphone directly in front of a pa speaker (if this is unavoidable, try using the equalizer to attenuate those high- or mid-range frequencies which are causing th...
18 11. When first setting up the xp40iw system in a new environment, it’s always a good idea to do a walk-around in order to make sure that coverage is provided for your entire performance area. As you do so, the “rf” led on the rear panel of the xp40iw should always remain lit. Always try to minimi...
19 specifications amplifier power output. . . . . . . . . . . . . 40-watt no. Of mic input . . . . . . . . . . . 1 x wired mic / 1 x wireless mic (xp40iw only) level controls . . . . . . . . . . . . 1 x wired mic / 1 x wireless mic (xp40iw only) ipod tone control . . . . . . . . . . . . . 1 x treble...
20 ht5 microphone transmitter transmission mode frequency modulation, 80kf3e, 15 khz peak deviation frequency range 173.80 mhz to 213.20 mhz, 25 frequencies osc system crystal controlled, x12 multiplication rf power 20 mw (usa models), 10 mw [(2 mw erp) european / uk models)] operating range 300 ft....
Fcc rules and regulations samson wireless systems are type accepted under fcc rules parts 90, 74 and 15. Licensing of samson equipment is the user’s responsibil- ity and licensability depends on the user’s classification, application and frequency selected. This device complies with rss-210 of indus...
Samson technologies corp. 45 gilpin avenue hauppauge, new york 11788-8816 phone: 1-800-3-samson (1-800-372-6766) fax: 631-784-2201 www.Samsontech.Com.
