Samson POWERBRITE PB9 Specifications - Architect’S & Engineer’S
ARCHITECT’S & ENGINEER’S
SPECIFICATION
The unit shall provide power distribution
to eight switched rear receptacles arranged
horizontally and vertically to accommodate
standard AC plugs and AC adapters as well as
one unswitched front panel receptacle.
The unit shall provide a front panel
retractable fluorescent light (using a F4T5CW
type bulb and a condenser type FS2 fluores-
cent starter), a 15 amp circuit breaker, a mains
On/Off switch and a light switch. It shall pro-
vide spike protection from hot to neutral, hot
to ground and neutral to ground. The
PowerBrite PB9 shall have a maximum clamp-
ing voltage (@ 100 amps) of 400 volts,
Maximum surge current of 8,000 Amps and a
maximum spike energy of 85 joules all at a
response time of 1 nanosecond. The unit shall
have an internal 500 milliAmp T-type starter
fuse.
The front panel nameplate shall be cus-
tomizable where as the Samson Logo may be
replaced with any company logo. The
PowerBrite owner’s manual shall provide infor-
mation on obtaining a custom logo.
The dimensions shall be 19
″
(482 mm)
wide, 7.5
″
(190 mm) deep and 1.75
″
(44.5
mm) high (1 rack space). Weight shall be 7 lb.
(3.2 kg). The PowerBrite shall carry a three-
year warranty.
The unit shall be a SAMSON POWERBRITE
PB9.
FLUORESCENT
LIGHTING UNIT
REAR
OUTLETS
15A
LIGHTING
SWITCH
CIRCUIT
BREAKER
FRONT
AC OUTLET
OUTLET
SWITCH
SURGE
PROTECTION
AND RFI
AC MAINS
s
BALLAST
Specifications subject to change without notice. © 1998 SAMSON
BLOCK DIAGRAM
POWERBRITE PB9 SPECIFICATIONS
Electrical:
Number of Outlets
8 switched, 1 unswitched
Max. Current
15 Amp (circuit breaker protected)
Input Voltage (RMS)
0 to 130 VAC continuous
Spike Protection Mode
Hot to Neutral,
Hot to Ground,
and Neutral to Ground
Max. Clamping Voltage (@ 100 A)
400 VAC
Response Time
1 nanosecond
Max. Surge Current
8,000 Amps (8 x 20 ms pulse)
Max. Spike Energy
85 Joules
Noise Attenuation
>20 dB, 1.5 MHz to 200 MHz
Power Cord
Pendant
Bulb/Starter:
Fluorescent Bulb Type
F4T5CW
Bulb Life (Typical)
3,000 Hours
Lumens
95
Fluorescent Starter
Condenser Type FS2
(110 Vac, 4 - 20 Watts)
Starter Fuse (Internal)
500 milliAmp T-type
General:
Dimensions
19
″
(w) x 7.5
″
(d) x 1.75
″
(h)
482 mm (w) x 190 mm (d) x 44.5 mm (h)
Weight
7 lbs. / 3. 2 kg
Conforms
UL and CUL