Line level converter box s class signal p r oc essors.
Table of contents introduction and features 3 front and rear panel layout 4 operating the s convert using the level controls 5 typical set-up 6 wiring guide 7 specifications 8 copyright 2003, samson technologies corp. Printed january 2003 samson technologies corp. 575 underhill blvd. P.O. Box 9031 s...
S convert introduction and features introduction thank you for purchasing the s convert stereo line level converter from samson audio! S convert provides a convenient solution for matching levels and interfacing audio devices, either on stage or in the studio. The s convert is a specially designed m...
S convert front and rear panel layout a -10 left input - rca input for con- necting left, -10dbv input signals. B power led - green led will illumi- nate when power is on indicating the s convert is ready for operation. 1 +4 level - control knob used to adjust the signal level connected to the +4dbu...
5 operating the s convert the basic procedure for setting up and using your s convert is simple and takes only a few minutes. Remove all packing materials (save them in case of need for future service) and check to make sure that you remove the supplied ac power adapter. • connect the output from th...
Typical set-up the diagram below shows a typical set-up for a project recording studio using the s con- vert to match the levels of a consumer cd player to the correct operating level of a profes- sional dat recorder. 6 operating the s convert.
7 3 s convert wiring guide wiring guide there are several ways to interface the s convert, depending on your exact set-up. Follow the cable diagrams below for connecting your gear..
Samson technologies corp. 575 underhill blvd. P.O. Box 9031 syosset, ny 11791-9031 phone: 1-800-3-samson (1-800-372-6766) fax: 516-364-3888 www.Samsontech.Com frequency response 10 hz to 100khz noise level -110 dbu maximum ouput level bal: +18 dbu unbal: +16 dbv max input level bal: +22 dbu unbal: 2...