Nasa_panel_im_en_03683a(1).Indd 12 2013-01-14 오후 8:35:41.
Air conditioner installation manual imagine the possibilities thank you for purchasing this samsung product. To receive more complete service, please register your product at www.Samsung.Com/register panel (1 way / 2 way / 4 way cassette type) it fr es en pt de el db68-03683a(1) ar ru nasa_panel_im_...
2 for slim 1 way cassette fix 2 hooks of the panel on both sides of the indoor unit. 1 tighten the panel fixing screws. 2-1 tighten the panel fixing screws temporarily. 2-2 close the gap between the panel and the ceiling by adjusting the position of the panel and then tighten the screws completely. ...
3 english for slim 1 way cassette connect the cables between the indoor unit and the panel. 4-1 remove the 3 screws of the electrical component box and take out the electrical component box cover. 4-2 connect the panel connector to the indoor unit pcb connector. connect the swing motor of the pane...
For slim 1 way cassette fix 2 hooks of the panel on both sides of the indoor unit. 1 tighten the panel fixing screws. 2-1 tighten the panel fixing screws temporarily. 2-2 close the gap between the panel and the ceiling by adjusting the position of the panel and then tighten the screws completely. 2 ...
English for slim 1 way cassette connect the cables between the indoor unit and the panel. 4-1 remove the 3 screws of the electrical component box and take out the electrical component box cover. 4-2 connect the panel connector to the indoor unit pcb connector. connect the swing motor of the panel ...
Fix 2 hooks of the panel on both sides of the indoor unit. 3 assemble 8 bolts to the panel and the indoor unit temporarily, then adjust it not to leave a gap between the ceiling and the panel. 4 remove the front grille. 2-1 remove the safety clips. 2-2 open the front grille about 45° and pull it for...
7 english 7 install the air flow blade. 5-1 fix the right part of the blade to the indoor unit. 5-2 fix the other side of the blade. 5-3 fix the middle part of the blade by pushing slightly the middle tab in the indoor unit. 5 if the direction is incorrect, the blade will not be inserted smoothly. C...
For 4 way cassette open the electrical component box cover. • after untightening the screws, slide the electrical component box cover in the direction of the arrow as shown in the figure and pull it down. 1 push the switch type handles inward and pull the grille to open. • handles are located on the...
English for 4 way cassette english install the panel using 2 hooks on the both sides of the indoor unit. 3 detach the 4 corners of the panel. Use two grooves on the each corner of the panels when pulling them out. • handle the corner with digital display gently, since there are electrical cables con...
10 e- 10 e- 10 10 close the electrical component box cover and tighten the screws. 7 attach and close the front grille. • make sure the hooks on the rear side of grille fits properly into the grooves on panel ( ) and then push the panel to close ( ). 8 check out that the panel is fixed to the indoor...
11 english memo nasa_panel_im_en_03683a(1).Indd 11 2013-01-14 오후 8:35:41.
