Owner’s instructions aht18fgmbc aht18fgmea aht18fgmeb aht19fgmea aht19fgmeb aht20fgmba aht24fgmba aht24fgmeb aht18agmbc aht18agmea aht18agmeb aht19agmea aht19agmeb aht20agmba aht24agmba aht24agmeb window-type room air conditioner ( cool and heater ) e a db98-13604a(1).
E- 2 the following safety precautions must be taken when using your air conditioner. Safety precautions 1 the unit must be plugged into an independent circuit. The air conditioner must be installed in accordance with national wiring regulations and safety regulations wherever applicable. 2 some inst...
Contents ◆ p reparing y our a ir c onditioner ■ safety precautions ......................................................................................... 2 ■ air conditioning unit - main parts, buttons and display ............................... 4 ■ remote control buttons ...........................
Air conditioning unit - main parts, buttons and display air inlet (inside) air filter (the air filter is located inside) inner air flow blades (right/left orientation) air outlet outer air flow blades (up/down orientation) air inlet (outside) ventilation lever power plug (the type of the power plug ...
Remote control - buttons temperature adjustment buttons fan speed adjustment buttons on/off button e- 5 timer setting button sleep timer setting button operating mode selection buttons air flow blade swing button.
Getting started you have just purchased a window-type room air conditioner and it has been installed by your installation specialist. Your owner’s instructions contain valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of t...
Inserting the remote control batteries you must insert or replace the remote control batteries when: ◆ you purchase the air conditioner ◆ the remote control does not work correctly ☛ use two aaa, lr03 1.5 v batteries. Do not use old batteries or different kinds of batteries together. Batteries may b...
You must select the cool mode if you wish to lower the temperature in your room. You can also set the fan speed. 1 if necessary, press the (on/off) button. Result: ◆ the operating mode indicator (cool, fan or heater) on the unit comes on. ◆ the air conditioner starts up in the mode selected when the...
2 if the heater indicator is not lit up on the unit: ◆ press the button on the remote control or ◆ press the button on the unit one or more times until the heater indicator lights up result: ◆ the unit beeps each time you press . ◆ the air conditioner starts up in heater mode. ➢ you can change modes...
Airing your room e- 10 if the atmosphere in your room is stale, you can air it using the fan feature and if necessary, evacuate the stale air outside. 1 if you wish to evacuate stale air outside, push the ventilation lever on the front of the unit to the right and the open position ( ). Result: the ...
Adjusting the air flow direction horizontally e- 11 depending on the position of the unit in your room, you can adjust the orientation of the inner air flow blades on the right-hand side of the unit, thus increasing the efficiency of the air conditioner. 1 press the (or on the unit) button on the re...
Setting the on timer e- 12 remote control control panel the on timer enables you to switch on the air conditioner automatically after a given period time. You can set the period of time from 1 hour to 24 hours. You can set the period of time from 1 hour to 24 hours. You can select the on timer only ...
Setting the off timer e- 13 the off timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 1 hour to 24 hours. You can select the off timer only when the air conditioner is on. 1 check that the air conditioner has been swit...
Setting the sleep timer the sleep timer can be used when you are cooling or heating your room to switch the air conditioner off automatically after a period of 8 hours. ➢ if you wish to switch the unit off at a specific time, refer to page 13. 1 make sure that you have selected either cool or heater...
E- 15 operating recommendations here are a few recommendations that you should follow when using your air conditioner. Warm air circulation the air conditioner circulates warm air to heat your room; as a result, some time will be required after starting the air conditioner to warm the entire room. I...
Cleaning your air conditioner ( ✴✴✴✴ fg ✴✴✴ models) e- 16 if you... Will not be using the air conditioner for a long period of time have not used the air conditioner for a long period of time then... ◆ set the fan going for a few hours to dry the inside of the air conditioner thoroughly. ◆ switch th...
E- 17 cleaning your air conditioner ( ✴✴✴✴ ag ✴✴✴ models) open the front grille by pulling on the tabs of the unit. 1 grasp the handle on the air filter and lift it slightly and then out to the front. 2 remove all dust on the air filter with a vacuum cleaner or brush. 3 when you have finished, inser...
Solving common problems e- 18 before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. The air conditioner does not operate at all triggered. ◆ check that the circuit breaker used for the air conditioner has not be...
E- 19 technical specifications design and specifications are subject to change without notice. Model ✴✴✴✴✴✴✴ ba/bc ✴✴✴✴✴✴✴ ea/eb power supply 220~, 60hz 220-240v~, 50hz.
Method of installation 500mm 500mm 75mm min. 300mm 500mm fence, wall or other obstacle 150mm min. 240mm approx.3˚ awning 750mm ➢ ◆ if the wall is greater than 150mm thick, cut the wall back on a 45˚ angle if possible. 100mm or more 45˚ 45˚ before installation, be sure to check the installation area ...
Installation of the drain tube fix the drain tube as shown in the figure. Installation of the drain pan the procedure for installing the drain pan should be determined by the condition of the installing area. ◆ in the case of an area where the drain pan can not be directly installed on the rear side...
This air conditioner is manufactured by:.