Samsung AHT18PGHBA Owner's Instructions Manual - page 12
Setting the On Timer
E-
12
Remote Control
Control Panel
The On Timer enables you to switch on the air conditioner
automatically after a given period of time. You can set the period of
time from 1 hour to 24 hours.
You can select the On Timer only when the air conditioner is off.
1
Check that the air conditioner has been switched off; if necessary,
press the (On/Off) button.
3
Set the operating time by pressing:
◆
on the remote control.
or
◆
on the unit one or more times.
Possible time is between 1 hour and 24 hours inclusive.
Result:
◆
The remaining time is displayed and decreased by 1 hour
automatically to indicate the remaining time.
◆
The air conditioner switches on automatically when the
operating time reaches zero.
➢
You can change the setting mode, fan speed, and air flow direction
after setting the On Timer.
To Cancel the On Timer
2
Set the required mode by pressing the appropriate button:
◆
, or on the remote control
◆
button on the unit (press it one or more times until the
appropriate operating mode indicator lights up)
To cancel the On Timer, press:
◆
on the remote control or on the unit one or more times until
" " is displayed.
or
◆
(On/Off) button on the remote control or unit. (The air conditioner
operates in the mode selected when the unit was last used.)
AHT18PGHBA_E_17335 04/2/23 10:38 Page 12