Sensei LH-QC 58 User Manual - Instructions

Manual is about: Quick Clip Lens Hoods

Summary of LH-QC 58

  • Page 1

    Quick clip lens hoods user manual lh-qc52, lh-qc55, lh-qc58, lh-qc62, lh-qc67, lh-qc72, lh-qc77, lh-qc82.

  • Page 2

    1 thank you for choosing sensei. The sensei quick clip lens hood mounts securely to your camera lens to prevent stray light from entering, thus eliminating glare and lens flare. This specially-designed lens hood allows for quick mounting with a simple press and click. The lens hood is easy to revers...

  • Page 3: Overview

    2 overview quick clip lens ring quick clip lens hood ball bearing rail ball bearings lens thread filter thread top bottom.

  • Page 4: Instructions

    3 instructions note: for use with internal focusing lenses and non- rotating filters. Do not use with thin filter widths, as they may be difficult to remove. Accommodates lenses with widest focal length of 20 mm for full frame and 15 mm for crop sensors. Using center pinch lens caps are recommended....

  • Page 5

    4 2. Align the lens thread on the quick clip lens ring with the thread on the front of your cameras lens. 3. Tu r n t h e r i n g clockwise until it is securely fastened onto the lens..

  • Page 6

    5 4. Position the quick c l i p l e n s h o o d with the label top aligned with the top of the lens. 5. Firmly press the lens hood onto the lens ring until it clicks into place. Top top.

  • Page 7

    6 6. To reverse the hood, remove it from the ring, reverse the orientation and press it into place. Top.

  • Page 8: One-Year Limited Warranty

    7 one-year limited warranty this sensei product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warran...

  • Page 9

    8 to obtain warranty coverage, contact the sensei customer service department to obtain a return merchandise authorization (“rma”) number, and return the defective product to sensei along with the rma number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and ...

  • Page 10: Www.Madebysensei.Com

    Sensei is a registered trademark of the gradus group. © 2016 gradus group llc. All rights reserved. Www.Madebysensei.Com gg1.