Sensoray 4011 Hardware Manual - page 5
Connectors
Video in (J10), video out (J2)
Molex 0705530001. Mating part: Molex 0050579402.
Pin
Signal
1
video
2
ground
Power (J11)
Molex 0705530002. Mating part: Molex 0050579403.
Pin
Signal
1
+12 V DC
2
not connected
3
ground
Audio out (J13)
Molex 0705530003. Mating part: Molex 0050579404.
Pin
Signal
1
left channel
2
ground
3
ground
4
right channel
Keypad (J1/P3)
J1 – standard flexible flat cable (FFC) connector. Accepts a ZIF-style flex tail, 0.1” pitch.
Molex 90500-4007, 7 pin. Common line: pin 6. J1 is facing inwards.
P3 – alternative connector for 7-9 button keypads. FCI/Amphenol 76382-408LF, 76382-
409LF, 76382-410LF. Mating connectors are FCI/Amphenol 65801-008LF , 65801-009LF,
65801-010LF, respectively. Common line: pin 5. P3 is facing outwards. Connector P3 is
installed by custom order only.
Recommended mapping for keypad pins and functions:
5