Sensorio LZR-W400 User manual - Mounting Side

6

4

1

2

3

3

left

right

MOuNTING SIDE

Stay outside of the detection 

field to avoid disturbances.

Select the corresponding mounting side.

The sensor then learns its environment and automatically 

determines the detection field. Both red LEDs flash slowly and 

the 3 visible laser beams automatically light up during 30 seconds.

WITH BACKGROUND

WITHOUT BACKGROUND

The sensor memorizes the floor as reference point 

and will signal a fault in case the orientation of the 

sensor is changed (on purpose or by accident).

Adjust the lateral position of 

the detection field.

Adjust the tilt angle of the 

detection field with the hex 

key.

Lock the position of the 

mounting bracket to avoid 

malfunctioning in case of 

extreme vibrations.

Unlock the sensor and activate the visible laser beams.

The visible laser beams indicate approximately 

the postion of curtain C1 and limit the angle of 

the detection field.

The visible laser beams stay activated for 15 minutes 

or can be turned off the same way they were 

activated.

POSITIONING

left

right

centre

C1

C2

C3

C4