Infrared thermometer model: st 660 instruction manual broad temp..
Infrared thermometer instruction manual st660 version-01 05/apr. Broad temp..
1.Product introduction 1-2 applications 2.Safety information 2-2 safety symbols 3.Specifications 4.Operation instructions unit diagram 5.Techniques of infrared thermometer 6.Maintenance 1-1 features 2-1 cautions 4-1 quick start 4-2 4-3 c/ f and battery change 5-1 field of view(fov) ratio 5-2 emissiv...
Broad temp. Infrared thermometer 1 ultra low power consumption in shutdown mode. Extended long time measuring reliability. Backlit lcd display. C or f selectable. Electronic trigger lock. 1-1 features electrical troubleshooting. Automotive repair and maintenance. Air conditioner. Science experiment....
Read the following safety information carefully before attempting to operate or service the meter. Only qualified personnel should perform repairs or servicing not covered in this manual. 2.Safety information do not submerge the unit in water. This product is not designed for use in medical evaluati...
3.Specifications distance/spot ratio temperature range accuracy thermopile repeatability resolution response time emissivity / switchable backlight auto power off battery type dimensions weight accessory 12:1 -50~999 (-58~1830 ) 3 c( 5 f) from -50~-20 c(-58~-4 f) 8~14 m 1 c ( 2 f) 1 c (1 f) 500 ms. ...
4.Operation of instrument to measure a temperature, point the unit at the target you want to measure, pull the trigger and hold. In scan mode, the lcd displays the current temperature in celsius or fahrenheit. The unit will hold the last reading for about 6 seconds after the trigger is released; the...
4-3 c/ f and battery change the unit is powered by 9v battery and displays temperatures in either c or f. The user has to replace the battery when the battery voltage drops below the voltage for reliable operation and at the same time the low battery symbol will appear. To change the 9v battery, p u...
Mm 34@250 48@500 78@1000 d:s=12:1 inch 1.4@10 1.9@20 3.1@40 d s 5.Techniques of infrared thermometer the field of view is the angle of vision at which the instrument operates, and is determined by the optics of the unit. The fov is the ratio of the distance from the target to the target diameter. Th...
Emissivity is the ability of an object to emit or absorb energy. Perfect emitters have an emissivity of 1, emitting 100% of incident energy. An object with an emissivity of 0.8 will absorb 80% and reflect 20% of the incident energy. Emissivity is defined as ratio of the energy radiated by an object ...
St 660 version-01 05/apr. 3f, no.122, sec.1, sanmin road, ban-ciao, taipei 220, taiwan, r.O.C. Tel:886-2-2956-8198 fax:886-2-2956-7662 http://www.Sentrytek.Com.Tw.
