SEOWON INTECH SWC-5x00W series User Manual - page 11

This Document cannot be used without the authorization of SEOWO

NINTECH

11

How to check your IP address

■  

To run the Command Prompt, click the Start button at the lower left corner of the

    Windows screen. Click Run, then enter “cmd” in the Open box, and click OK.

■  

When the Command Prompt window opens, enter the “ipconfig” command to

    verify the IP address, Subnet mask, and Gateway, which are automatically assigned to PC.

Run cmd

Verify IP address

NOTE

All PCs connected to CPE will receive their own assigned IP address.

NOTE

If an IP address is not assigned, check the following, and then restart the PC and 

check whether an IP address is assigned. 

LAN cable connection between PC and CPE

Check TCP/IP setup details