Seraphy AirWave 900 Quick Start Manual - page 2
3. Pairing L/R earphones
Press the button of the second earbud and hold for 2 seconds
until the blue light comes on. Keep it near the already first
paired earbud for 3 ~ 4 seconds. The two earbuds will be
paired automatically. The blue light from both earbuds will
flash.
2. Connecting the AirWave 900: Select either the left or
right earbud, press and hold the entity button until the red
and blue lights flash rapidly indicating it is searching mode.
Turn on Bluetooth on your mobile device and search for D900
and select connect. (Make sure to fully charge the AirWave
before trying to pair or pairing will be unsuccessful). For
future use, you have to pair the same (either L or R) earbud
first before pairing the other earbud.
4. Power off
Press and hold the power/function button for 8 seconds, then the
red LED will flash for 1 second and shut off.
5. Call function (Only one side of the earbud can be used during
phone call function)
Dial: when the earphone is connected to phone, press the power/
function button twice to redial the most recent phone number.
Incoming call: When there is an incoming call, press the power/
function button once to answer the call (press and hold the entity
button to refuse it)
End call: Press the entity button again to end call.