Summary of NA403
Page 1
Na403 home monitoring gateway user guide.
Page 2: Table of Contents
Table of contents chapter 1 introduction ............................................................................................. 1 package contents .............................................................................................................. 1 features ...........................
Page 3: Package Contents
1 chapter 1 introduction this chapter provides an overview of the home monitoring gateway's fea- tures and capabilities. Congratulations on the purchase of your new home monitoring gateway. The home monitoring gateway is a consumer electronic device, which is used for home monitoring and security. P...
Page 4: Leds
Leds front-mounted leds the home monitoring gateway has 8 leds. Power • on (green)- power on • off - power off • on (amber) - post (power on self test) failure or device malfunc- tion eth (1~2) (green) • on (green)- lan connection established. • off - no active connection on the corresponding lan po...
Page 5
Rear panel reset this button has two (2) functions: • reboot. When pressed and released, the home monitoring gate- way will reboot (restart). • clear all data. This button can also be used to clear all data and restore all settings to the factory default values. To clear all data and restore the fac...
Page 6: Requirements
2 chapter 2 initial installation this chapter covers the software installation of the home monitoring gate- way. Requirements • network cables. Use standard 10/100baset network (utp) cables with rj45 connectors. Procedure 1. Choose an installation site select a suitable place to install the home mon...
Page 7
Initial installation • the eth led should be on (provided the pc is also on.) 5.
Page 8: Overview
3 chapter 3 board description this chapter provides board description for the home monitoring gateway. Overview na403 is a home gateway/automation, monitoring platform based on the broadcom chip bcm5354. Below is an image of the board showing different connection and interfaces. Components and conne...
Page 9
6. Wlan antenna - this is he antenna for wireless lan. 7. Usb connector - the two connectors are usb hosts with support for mass storage de- vices. Currently, there is no auto detection for plugged in devices; the devices will need to be manually mounted. 8. Zigbee module - this is a zigbee static c...
Page 10
Console port connection guide for platform debugging, please locate the console cable accompanied with the development kit. 8.
Page 11: Router/ap Configuration
Router/ap configuration to configure the gateway settings for the na403, the user simply connects the host to the lan port. Then using internet explorer connect to the url http://192.168.1.1 the default user name and password is: user name: (blank) password: admin the image below shows the configura...
Page 12
11 regulatory approvals fcc statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equ...