Serene LTRS7946 Installation and operating instructions manual

Manual is about: LTRS Series Serene Heated Ladder Towel Rail Square Profile

Summary of LTRS7946

  • Page 1

    Ltrs series serene heated ladder towel rail square profile in s ta lla ti o n a n d o p e ra ti n g i n s tr u c ti o n s p r n 5 9 2 4 r e v . 3 .0 n o v . 2 0 0 8 e d it io n.

  • Page 2

    Contents 1 safety information ........................ 3 2 installation .................................... 4 regulations ............................................................. 4 methods ................................................................. 4 components..............................

  • Page 3

    3 ltrs series serene heated ladder towel rail - square profile 1 safety information when using any electrical appliance, safety precautions should always be observed. Read these instructions carefully before installation and retain for future reference. • this appliance is not intended for use by pe...

  • Page 4

    4 ltrs series serene heated ladder towel rail - square profile 2 installation regulations this appliance must be installed in accordance with the relevant wiring rules and regulations which cover installation of appliances and accessories in damp situations such as bathrooms, showers, laundries and ...

  • Page 5

    5 ltrs series serene heated ladder towel rail - square profile components the heated ladder towel rail is supplied with the following installation components: table 1: installation components item description quantity 1 standard mounting bracket 3 2 cable mounting bracket 1 3 mounting base extension...

  • Page 6

    6 ltrs series serene heated ladder towel rail - square profile visible supply cord as standard, the supply cord exits through the bottom of either the left or right hand mounting leg (see figure 2 below). When installing the towel rail with the supply cord visible, the cable mounting bracket (item 2...

  • Page 7

    7 ltrs series serene heated ladder towel rail - square profile to install the towel rail with visible supply cord: 1. Firstly, establish a suitable position on the wall for attaching the towel rail, with at least two leg mounting brackets aligned with wall studs or dwangs. 2. Remove the cable mounti...

  • Page 8

    8 ltrs series serene heated ladder towel rail - square profile concealed supply cord the supply cord can be concealed inside the bottom mounting leg of the towel rail and wired directly into the wall. Before installing the towel rail with the concealed supply cord: 1. Remove the cable mounting brack...

  • Page 9

    9 ltrs series serene heated ladder towel rail - square profile to install the towel rail with concealed supply cord: 7. Establish a suitable position on the wall for attaching the towel rail, with at least two leg mounting brackets aligned with wall studs or dwangs. Mark the wall with the location o...

  • Page 10

    10 ltrs series serene heated ladder towel rail - square profile optional spacers optional 8mm spacers (part no. Tur9346-2) are available to space the top mounting brackets when the bottom half of the wall is tiled (see figure 6 below). To fit the optional spacers: top mounting bracket towel rail fra...

  • Page 11

    11 ltrs series serene heated ladder towel rail - square profile 3 specifications table 2: specifications copyright © 2006 skope industries limited. Skope industries limited reserve the right to alter specifications without notice dimensions model height width depth weight wattage ltrs7946 795mm 525m...

  • Page 12

    12 ltrs series serene heated ladder towel rail - square profile 4 operation your serene heated ladder towel rail costs approximately the same to run as a 100 watt light bulb. It will take approximately 45 minutes to reach normal operating temperature and, if need be, can be left running continuously...