Summary of S100
Page 2
Introduction serpent enters the competitive electric 1/10th scale pan car market with the s100 world gt, which like all our previous cars, has been designed to win straight from the box. Featuring a number of truly innovative features such as a link-type rear support, alu-carbon rear motorpod, float...
Page 3
The printed instruction manual included with your serpent kit is very complete, though due to continuous product development, more up-to-date information may be provided at our serpent.Com website. All information about the serpent s100 is accessible from the serpent s100 product page found on serpe...
Page 4
Length after assembly / gap between two items assembly path of one item into another group of items (within lines) should be assembled first direction the item should be moved glue one item to another press/insert one item into another connect one item to another apply transmission grease (grey), th...
Page 6
Page 6 ca glue to prevent the risk of the carbon fi bre splitting in the event of a crash you should apply ca glue around the chassis’ edge and battery slots as shown in red below..
Page 7
Page 7 a 2 m3x12.
Page 8
Page 8 m2.2x12 m2.2x12.
Page 9
Page 9 m3x8 m3x8 m3x8 m3x8.
Page 10
Page 10 m3x8 m3x8 m3x8 m3x8 m3x8 m3x8.
Page 11
Page 11 m3x3 silicone grease m3x6 m3x3 m3x3.
Page 12
Page 12 m3x10 m3x10 m2.2x6 don’t tighten the screws yet.
Page 13
Page 13 m3x6 m3x6 m3x6 m3x6 m2.5x8 m2.5x8 m2.5x8 m2.5x8.
Page 14
Page 14 4.5mm thread lock m3x8 m3x8.
Page 15
Page 15 m3x5.
Page 16
Page 16 m2x6 m2x6 m2x6 m2x6 m3x5 m3x5 m3x5 m3x5 adjust movement and play with these screws adjust movement and play with these screws tighten these screws after assembling the links 5mm.
Page 17
Page 17 1 2 3 4 unscrew the bottom half of the pre-assembled shock absorbers. Filling fill the shock body with the supplied shock absorber oil. Bleeding let the oil settle and allow the air to escape. For both shocks with the shock body filled with oil, slowly screw the end of the shock back onto th...
Page 18
Page 18 m3x5 m3x5 m3x5 m3x5.
Page 19
Page 19 m3x10 m3x6 m3x6 m3x6 m3x10 m3x6 3mm m3x6.
Page 20
Page 20 page 20 page 21 orientation-conical-springs.
Page 21
Page 21 note insert orientation ride height of 3.5mm m3x8.
Page 22
Page 22 mounting position for 1-s lipo battery mounting position for 2-s lipo battery m3x5 m3x8 m3x5 m3x8.
Page 23
Page 23 m2.5x8 m3x6.
Page 24
Page 24 m3x5.
Page 25
Page 25 use the following servo saver insert with these brands of servos. 23 - sanwa / ko / jr 24 - hitec 25 - futaba not included m3x6 m3x6 m3x8.
Page 26
Page 26 21 not included m3x6 m3x6.
Page 27
Page 27 22 32 mm.
Page 28
Page 28 23 m3x10 m3x10
Page 29
Page 29 24 m3x10 m3x10 m3x10 m3x10
Page 30
Page 30 25.
Page 31
Page 31 26 m3x8 m3x3.
Page 32
27.
Page 34
Page 34 110104.
Page 35
Page 35 411168 411166 411251 411074 411237 411075 411186 411075 411069 411186 411250 411193 411188 411187 411074 411072 110104 411195 411196 411194 110135 110402 411074 411072 110135 411238 411061 411189 411190 411154 411154 110122 110122 110122 110128 110108 411191 411200 411207 411201 411192 41115...
Page 36
Page 36.
Page 37
Page 37 401025 110137 411121 411040 411239 411007 411120 110115 401025 110109 110100 110122 411040 411023 411143 411077 110109 110128 411061 411040 411239 411243 411040 411023 411243 411242 411241 411240 110402 411241 411154 411154.
Page 38
Page 38.
Page 39
Page 39 fasteners 411123 screw-set 110402 nut nylock m3 (10) 411144 nut nylock m2.2 (10) 411145 setscrew allen m3x10mm (10) 110114 setscrew allen m3x8 (10) 110137 setscrew allen m3x6 (10) 411147 setscrew allen m3x5mm (10) 401143 screw allen cilinderhead m2x6 (10) 110116 setscrew allen m3x3 (10) 1101...
Page 40
W w w . S e r p e n t . C o m i n f o @ s e r p e n t . C o m 411244 manual s-100