1. DL manuals
  2. Serpent
  3. Motorized Toy Car
  4. S411 Eryx 3.0
  5. Instruction Manual

Serpent S411 Eryx 3.0 Instruction Manual

Summary of S411 Eryx 3.0

  • Page 2

    Introduction thank you very much for selecting this serpent rc car and thus become a member of the ever growing worldwide serpent racing family. Serpent started in 1980 and has been growing its product-line and fan -base ever since. The serpent eryx 4.1 is a state of the art 1/10 scale 4wd touringca...

  • Page 3: Oil

    3 how to use the manual each step contains a variety of numbers, lines, and symbols. The numbers represent the order in which the parts should be assembled. The lines are described below. Each step contains a variety of symbols described below. Icons description lines description assembly path of on...

  • Page 4

    Rear diff assembly 4 5x15x0.2 5x15x0.2 2x10 2x10 step 1 diff bag 1.1 1.2 1 1 step 2 1- fit the o ring before filling the diff with silicone oil. 2-add just enough oil to cover the large gear before assembling the small satellite gears and cross pins. Use the silicone oil supplied in the kit. For the...

  • Page 5

    5 step 4 step 3 step 5 m2.5x12 fill the differential with silicone oil 1 mm above the crosspin, do not overfill. Use the silicone oil supplied in the kit. For the correct cst value please check the default setupsheet. 4x10x0.2 4x10x0.2 use a digital scale to measure the exact amount of oil in the di...

  • Page 6

    Bag 1 6 central assembly step 6 6.2 6.1 m3x6 m3x14 m3x6 to avoid any tweak in your chassis please follow next instructions: 1- pre-assemble the m3x14 screw in the step 6.1. Do not fully tighten it. 2- fit and fully tight the m3x6 screw in the step 6.2. 3- fully tighten the pre-assembled m3x14 screw....

  • Page 7

    7 step 7 m3x6 m3x6 m3x6 m3x6 m3x6.

  • Page 8

    Bag 2 rear i assembly 8 step 8 step 9 9.1 9.2 rear default wheelbase shims m3x6 m3x6 m3x8 m3x8 m3x8 3x5x2 3x5x1 3x5x1 3x5x2 m3x8 m3x6 3x5x2 3x5x1 m3x8 m3x8 the rear front suspension brackets are not symetrical. Place them with the 0.5 outside for having a rear toe in of 3º as default..

  • Page 9

    9 step 10 10x15x4 10x15x4 m3x8 m3x8 m3x8 10.1 10.2 rear belt tension use the central slot as starting position. Rear belt tension use the central slot as starting position. 10x15x4 m3x8.

  • Page 10

    Bag 3 front i and central shaft assembly 10 step 11 10x15x4 10x15x4 m2.5x6 11.1 11.2 m3x8 m3x8 1 1 2 2 2 10x15x4 m3x8 m2.5x6 step 12 front belt tension use the central slot as starting position..

  • Page 11

    11 step 13 13.1 13.2 13.3 r4 m3x4 2x12 5x8x2.5 m3x5 m3x5 5x8x2.5 2x12 r4 r4 m3x5 5x8x2.5 step 14 2x12 m3x4.

  • Page 12

    Front antiroll bar rod length 12 step 15 step 16 rear default wheelbase shims m3x6 m3x6 3x5x2 3x5x2 m3x8 m3x8 m3x8 m2.5x6 m3x6 3x5x2 m3x8 m3x8 the front rear suspension brackets are not symetrical. Place them with the 1.5 outside. 26 mm 16.1 16.2 16.3 m2.5x6 bag 4.

  • Page 13

    Bag 5 13 steering assembly step 17 step 18 3x5x1 m3x6 17.1 17.1 steering rod length 21 mm m3x6 3x5x0.3 3x5x0.3 3x5x1 m3x6 m3x6.

  • Page 14

    14 step 19 step 20 19.1 19.2 m3x10 m3x6 m3x8 3x5x1 3x5x1 3x5x1 3x5x1 3x5x2 m3x8 m3x8 m3x6 m3x6 m3x6 m3x6 1 3 2 m3x10 m3x6 m3x6 m3x6 m3x8 3x5x2 3x5x1 check how many teeth your servo spline has (23, 24 or 25) and use the right levers..

  • Page 15

    15 rear ii assembly step 21 step 22 21.1 22.1 21.2 steering link length 24 mm rear camberlink position 22.1 1 1 2 3 4 2 3 4 m2x5 m3x2.5 2x10 2x10 5x10x4 3x5x2 3x5x1 6x12x4 6x12x4 5x10x4 m2x5 2x10 3x5x2 3x5x1 oil il o oi oil m3x2.5 bag 6.

  • Page 16

    16 step 23 step 24 24.1 24.2 rear antiroll bar rod length m2.3x4 m3x12 1 2 oil il o oi oil m2.3x4 m3x12.

  • Page 17

    17 step 25 step 26 25.1 25.2 26.1 26.2 rear camber link length 9 mm m3x3 m3x3 3x5x1 3x5x1 3x5x2 m3x4 m3x4 m3x8 m3x3 1 2 2 3 do not overtighten m3x4 set screws to keep a free rotation of the antiroll bar. Do not fully tighten m3x3 set screw till the anti-roll bar will be assembled and correctly place...

  • Page 18

    18 front ii assembly 1 2 3 4 m3x2.5 2x10 oil il o oi oil 27.1 27.2 1 2 3 4 m2x5 m3x10 m3x12 2x10 5x10x4 6x12x4 step 27 step 28 6x12x4 5x10x4 m2x5 2x10 m3x2.5 m3x10 m3x12 bag 7.

  • Page 19

    M3x3 19 step 29 step 30 30.1 do not fully tighten m3x3 set screw till the anti-roll bar will be assembled and correctly placed in step 25.2. 30.2 m3x4 m3x4 m3x8 m3x3 m3x3 1 2 2 3 4 do not overtighten m3x4 set screws to keep a free rotation of the antiroll bar. M2.3x4 1 2 oil il o oi oil m3x6 m2.3x4 ...

  • Page 20

    20 step 31 31.1 31.2 rear camber link length 11 mm 3x5x1 3x5x1 3x5x2 front camberlink position 3x5x2 3x5x1.

  • Page 21

    21 shocks assembly shocks bag step 32 step 33 32.1 33.1 33.2 32.2 1 2 use some silicone oil during the assembly. Use some silicone oil during the assembly. For the correct piston holes please check the default setupsheet. Insert the o-ring inside the spring collar. Note the correct orientation of th...

  • Page 22

    22 step 34 step 35 34.3 34.1 34.2 shocks length: measure the shock length fully extended. 11.5 mm assemble the spring and spring- cup (align correctly) to complete the shock. Push the shock top and the membrane into the shock cap. 1- fill up with sillicone oil fully using the silicone oil supplied i...

  • Page 23

    23 step 36 step 37 m3x6 m3x6 m3x6 m3x6 m3x6 front shocks default position bag 8.

  • Page 24

    24 step 38 step 39 m3x6 m3x6 rear shocks default position m3x6 m3x6 m3x8 m3x8 2x10 2x10 m3x8 m3x6 2x10 1 4 4 2 2 3 3.

  • Page 25

    25 final assembly step 40 step 41 m3x8 m3x8 m3x8 m3x8 m3x10 m3x10 m3x10 m3x10 nylock nut m3 m3x10 m3x10 m3x8 m3x8 nylock nut m3 1 1 2 2.

  • Page 26

    Bag 9 26 step 42 step 43 2x10 2x10 2x10 1 2 2 body clip mid pinion is not included in the kit. Assemble the proper pinion for your set-up. 1 2 m3x10 m3x10

  • Page 27

    27 step 44 use double sided tape to mount the esc, rx and the transponder to the chassis. M3x5 m3x5 m3x5 electronics layout.

  • Page 28

    28 step 45 m3x6 m3x6 m3x22 m3x22 m3x6.

  • Page 29

    29 step 46 m3x5 m3x5 m3x5.

  • Page 30

    30 step 47 nut m4 flanged use glass-tape to fix the battery to the chassis and battery holders. Nut m4 flanged.

  • Page 31

    Exploded views 31 index diff, mid and front shafts exploded view 32 mid and front shafts exploded view 33 shocks exploded view 34 rear i exploded view 35 front i exploded view 36 steering exploded view 37 rear ii exploded view 38 front ii exploded view 39 final i exploded view 40 final ii exploded v...

  • Page 32

    Diff exploded views 32 401570 gerdiff 1/10 v2 shaft alu (2) 401593 401598 804176 110443 110208 401594 110445 110445 401595 804200 401593 401598 804176 110443 110208 401594 110133 401594 401592 geardiff v3 composite 401570 opt.

  • Page 33

    Mid and front shafts exploded views 33 401427 pully 19t alu 401533 spool nylon for 411 401629 middle shaft set s411 4.0 (3) 401633 pulley mid alu 19t s411 4.0 (2) 401723 solid axle set 401724 solid axle 401725 drive adaptor solid axle (2) 120007 spur-gear super-true 64p / 100t 120008 spur-gear super...

  • Page 34

    34 shocks exploded view 160148 shock onroad big bore piston 1 hole lf (2) 160149 shock onroad big bore piston 2 hole lf (2) 160150 shock onroad big bore piston 3 hole lf (2) 160151 shock onroad big bore piston 4 hole lf (2) 160297 spring grey tc 160298 spring black tc 160299 spring green tc 160300 s...

  • Page 35

    35 rear i exploded view 401352 belt kevlar 30s3m186 401375 suspension bracket alu 0 401376 suspension bracket alu 1 401377 suspension bracket alu 2 401378 suspension bracket alu 3 401419 suspension bracket alu 2.5 401453 wishbone rr lw hard (2) 401460 wishbone rr lw medium (2) 401468 pivot pin rear-...

  • Page 36

    36 front i exploded view 401375 suspension bracket alu 0 401376 suspension bracket alu 1 401378 suspension bracket alu 3 401419 suspension bracket alu 2.5 401420 suspension bracket alu 3.5 401452 wishbone fr lw hard (2) 401459 wishbone fr lw medium (2) 401467 pivot pin front inner tin (2) 401585 sus...

  • Page 37

    37 steering exploded view 401465 steeringrack v2 411206 401429 401372 110122 401588 110122 401589 401401 110108 411206 411253 110108 110409 110122 401429 411206 411206 401589 110122 401429 110108 401634 110408 401589 110409 110124 110409 110124 110409 411206 411253 110410 401372 110124 411187 401589...

  • Page 38

    38 rear ii exploded view 401496 antirollbar 1.2mm rear 401498 antirollbar 1.6mm rear 401499 antirollbar 1.8mm rear 401421 upright alu (2) 401461 upright medium (2) 411207 110117 411207 110409 411187 401411 401409 110208 110153 401497 401557 110116 401358 411206 401430 411206 411187 110409 110410 401...

  • Page 39

    39 front ii exploded view 401373 cvd axle set steel (2) 401415 antirollbar 1.2mm 401416 antirollbar 1.6mm 401417 antirollbar 1.8mm 401423 c-hub 2 alu l+r 401424 c-hub 4 alu l+r 401425 c-hub 6 alu l+r 401445 double joint cardan djc set (2) 401462 c-hub 4 l+r medium 401410 1314 411253 401379 401455 11...

  • Page 40

    40 final i exploded view 401413 battery mount (4) 401577 bumperplate carbon set s411 401621 motor fan mount s411 804293 body support washers med + high (5+5) 401642 802211 802211 401583 110122 1652 110104 160135 110402 401643 110109 110109 401577 110108 1667 401628 110124 110208 802211 802361 802361...

  • Page 41

    41 final ii exploded view 401413 battery mount (4) 401621 motor fan mount s411 401563 topdeck carbon 1.75mm 401495 topdeck carbon 2mm flex 401431 topdeck carbon 2.5mm 401464 lipo-battery-holder carbon 411 (2) 401627 adjustable battery mount set s411 401495 401413 401607 1606 110141 401413 401413 401...

  • Page 42

    Team serpent network eryx 4.1 spare parts www.Serpent.Com/400019/spares/ eryx 4.1 optionals parts www.Serpent.Com/400019/optionals/ serpent tools www.Serpent.Com/product/tools/ serpent merchandising www.Serpent.Com/product/merchandising/.

  • Page 43

    Serpent website and blog serpent social media www.Facebook.Com/serpentmrc www.Serpent.Com www.Teamserpent.Com www.Dragon-rc.Com www.Youtube.Com/user/serpentmrc www.Twitter.Com/serpentmrc www.Plus.Google.Com/+serpentmodelcars/posts www.Weibo.Com/teamserpent serpent promo pages http://promo.Serpent.Co...

  • Page 44

    98119 1 manual s411 4.1.