1. DL manuals
  2. Serpent
  3. Motorized Toy Car
  4. S811 Cobra E 2.1
  5. Instruction Manual & Reference Manual

Serpent S811 Cobra E 2.1 Instruction Manual & Reference Manual

Summary of S811 Cobra E 2.1

  • Page 1

    Instruction manual & reference guide.

  • Page 2

    2 the serpent s811 cobra is a complete new platform for the 1/8 scale electric offroad category of racing. The serpent s811 cobra is designed to be a world champion, while still being easy to use, assemble, and set up. You are now part of the worldwide network of serpent drivers, which gives you sup...

  • Page 4

    A 2 center diff bag a 3 4 8x16x5 8x16x5 tip tip tip add 2mm oil before assembling the gear use some grease during assembly use silicone oil to hold seal in position use some grease during assembly.

  • Page 5

    A 5 a 6 8x14x4 flanged 8x11x0.2 8x11x0.2 use some grease during assembly use some grease during assembly use silicone oil to hold seal in position tip tip tip add 2mm oil before assembling the gear.

  • Page 6

    Bag 1 m3x8.

  • Page 7

    9 10 11 bag 2 nylock nut m3 notice orientation of differential use 14x15.6x0.2 shims to adjust proper gear mesh. M5x4 2.5x13 m5x4 8x19x6 8x11x0.2.

  • Page 8

    Bag 3 nylock nut m3 nylock nut m3.

  • Page 9

    M3x12 m3x12 m3x8 m3x8 m3x4 2.5x15 2.5x17 8x16x5 nylock nut m3 use 8x11x0.2 shims between the hex and 8x16x5 bearing only in case of too much play.

  • Page 10

    17a 18 5x8x2.5 flanged.

  • Page 11

    Bag 5 19 20 21 22 m3x16 notice orientation of differential 2.5x13 8x19x6 m5x4 8x11x0.2 tip after building the differential with new gears a new differential case and bearings, the differential may feel a little tight. The connected parts need at least an hour run-time to create a perfect match. Atte...

  • Page 12

    Tip tip 23 24.

  • Page 13

    Bag 6 25 26 8x16x5 2.5x17 2.5x15 m5x4 left hand side right hand side m3x6 m3x6 use 8x11x0.2 shims between the hex and 8x16x5 bearing only in case of too much play 1 1 2 2.

  • Page 14

    27 28 m3x14 m4x18 special m4x18 special.

  • Page 15

    Bag 7 a 30 m4x10 use threadlock on these screws 29.

  • Page 16

    31 32 33 34 20.0mm 6x10x3 m3.

  • Page 17

    35 36 m3.

  • Page 18

    2 3 m3x3 m3x8 m3x8 m3x8 m3x8 m3x8 m4x10 m4x10 m4x10 m3x16 bag 8 use shims to allow servolever to clear radiobox by 0.5 to 1.0mm (see step c6).

  • Page 19

    M3x8 m3x12 m3x3 m2x10 m3x12 adhesive adhesive m4x10 place locktight on m3x12 screw as well as m3x8.

  • Page 20: 9/10

    Bag 9/10 front shock 97mm rear shock 123mm.

  • Page 21

    - fill up with sillicone oil - wait for air bubbles to escape - close top only 3/4 - check default set-up sheet for cst value of silicone oil.

  • Page 22

    M3x3 m3x3 m3x8 m3x8 m3x3 m3x3 m3x8 m3x8.

  • Page 23

    M4x4 m4x10 m3x15 use threadlock on all of these screws not included not included not included foam bag 11.

  • Page 24

    M3x6.

  • Page 25

    Part no description 600016 serpent s811 cobra buggy ep 1/8 4wd 2.1 radio instalation / battery option 600463 servo lever 23t 811-e alu 600464 servo lever 24t 811-e alu 600465 servo lever 25t 811-e alu 600681 s811e radiotray set light alu/carbon 600682 s811e batterystrap carbon (2) servo saver & stee...

  • Page 26

    600660 wheelaxle rr 811 2.0 alu (2) 600661 upright l+r 811 2.0 alu 600684 antiroll bar rear 3.0mm differential optional 600283 diff pin 10t alu (2) 600695 diff pinion 10t spiral 600696 diff gear 43t spiral pinions optional 600452 pinion 12t 600453 pinion 13t 600454 pinion 14t 600455 pinion 15t 60045...

  • Page 27

    110109 600443 600324 600446 110102 600445 600446 600376 1396 600198 600421 600210 600627 600627 1396 600425 600210 600421 600627 600627 600421 600376 110127 600200 600480 110432 600200 1349 110432 1349 600425 600421 600324 diff center 46t 600325 diff uiversal 600501 complete fr/rr 44t diff center fr...

  • Page 28

    110212 110115 110148 600641 1396 600476 1337 600474 600475 110107 110105 600197 600102 110216 600225 600633 600193 600174 600131 600108 110116 110116 803134 803134 1312 1312 110124 600155 110175 110132 110132 110142 110402 110112 110144 600263 600441 600263 600132 600263 600130 110147 600495 110148 ...

  • Page 29

    110107 600176 600132 600326 600136 c-hub 10 l+r 600268 c-hub 12 l+r 600665 c-hub 14 l+r alu 600183 600190 110216 600102 600197 600478 600141 600481 600183 600135 600444 600381 600131 110107 110116 110116 110145 600192 600263 110159 600192 600241 600131 600185 110402 600473 600472 1395 110431 600495 ...

  • Page 30

    600436 600436 600227 600437 600178 110402 110108 600437 600437 110146 600500 600436 110407 600499 1606 110149 600436 110116 600437 110127 600436 600479 110102 110102 110104 110104 110102 110102 600436 600436 110116 600204 600261 600442 110112 110402 1321 110402 600178 1321 600178 600128 110402 60012...

  • Page 31

    Front springs: 600646 600647 600648 600649 600650 600651 600658 set fr rear springs: 600652 600653 600654 600655 600656 600657 600659 set rr 600388 600640 600388 600387 600439 110158 600179 110405 600118 110104 110104 600263 110405 600179 600118 600184 110151 600685 600224 110115 600236 600133 60022...

  • Page 32

    # 82056-2 s811 cobr a ep 2.1 manual v ersion 1 www.Serpent.Com - info@serpent.Com.