1. DL manuals
  2. Servend
  3. Beverage Dispenser
  4. 2703329
  5. Installation, use & care manual

Servend 2703329 Installation, use & care manual

Manual is about: BEVERAGE & FLAVOR SHOT TOWERS

Summary of 2703329

  • Page 1

    Installation, use & care manual this manual is updated as new information and models are released. Visit our website for the latest manual. Www.Manitowocfsg.Com leader in ice & beverage dispensers beverage & flavor shot towers part number 5030763 5/11.

  • Page 2

    We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice. Safety notices as you work on manitowoc equipment, be sure to pay close attention to the safety notices in this manual. Disregarding the notices may lead to serious injury a...

  • Page 3: Table of Contents

    Part number 5030763 5/11 i table of contents section 1 general information read this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 unit inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 4

    Table of contents (continued) ii part number 5030763 5/11 section 3 operation general system overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 starting your beverage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 ...

  • Page 5: Section 1

    Part number 5030763 5/11 1-1 section 1 general information read this manual manitowoc beverage systems (mbs) developed this manual as a reference guide for the owner/operator and installer of this equipment. Please read this manual before installation or operation of the machine. A qualified service...

  • Page 6

    General information section 1 1-2 part number 5030763 5/11 serial number location this number is required when requesting information from your local distributor. The serial number is listed on the serial number decal affixed to the dispenser. Serial number location warranty information consult your...

  • Page 7: Section 2

    Part number 5030763 5/11 2-1 section 2 installation instructions general these instructions are provided to assist the qualified installer. Contact your manitowoc beverage equipment service agent or call manitowoc beverage equipment for information regarding start-up services. Dimensions important f...

  • Page 8

    Installation instructions section 2 2-2 part number 5030763 5/11 footprint *optional* 2.5" Ø cut out for syrup lines *optional* 1 1/4" Ø cut out for drain line *optional* 3/16" Øholes for mounting screws.

  • Page 9

    Section 2 installation instructions part number 5030763 5/11 2-3 location the location selected for the beverage dispenser must meet the following criteria. If any of these criteria are not met, select another location. • the air temperature must be at least 50°f (10°c), but must not exceed 95°f (35...

  • Page 10

    Installation instructions section 2 2-4 part number 5030763 5/11 electrical general minimum circuit ampacity the minimum circuit ampacity is used to help select the wire size of the electrical supply. (minimum circuit ampacity is not the beverage/ice machine’s running amp load.) the wire size (or ga...

  • Page 11

    Section 2 installation instructions part number 5030763 5/11 2-5 water supply recommended plumbing the plumbing diagram is printed on a white vinyl label, located above the inlet tubes for syrup and water. The plumbing diagram label can be accessed by removing the splash panel of the dispenser. The ...

  • Page 12

    Installation instructions section 2 2-6 part number 5030763 5/11 7. Mount the tower and secure with the two (2) enclosed #8 x 3/4” (1.905 cm) screws. 8. Plug the transformer butt connector into the tower. 9. Plug the transformer wall plug into a standard duplex outlet. 10. Set syrup pump pressure on...

  • Page 13: Section 3

    Part number 5030763 5/11 3-1 section 3 operation general system overview typical external carbonation (ambient) beverage tower system starting your beverage system upon completion of the beverage dispenser and / or system installation, all tubing, dispenser, and system components must be cleaned and...

  • Page 14

    Operation section 3 3-2 part number 5030763 5/11 component identification valve nozzle and diffusers soda or flavor shot valves key switch drainpan grid drain pan splash panel.

  • Page 15

    Section 3 operation part number 5030763 5/11 3-3 sequence of operation beverage valves post-mix beverage valves are designed to precisely meter the flow of both water and syrup to obtain the proper mixing ratio. The syrup and soda water components of the post-mix beverage are mixed as they leave the...

  • Page 16

    Operation section 3 3-4 part number 5030763 5/11 5. Co 2 cylinder – holds highly pressurized carbon dioxide (co 2 ). The co 2 cylinder is a steel or aluminum cylinder tank. Co 2 gas flows through the primary pressure regulator. 6. Bib pressure gauge – set for a minimum of 60 psi. Indicates co 2 pres...

  • Page 17: Section 4

    Part number 5030763 5/11 4-1 section 4 maintenance cleaning daily cleaning all cleaning must meet your local health department regulations. The following cleaning instructions are provided as a guide. You will need clean warm water to wash and rinse with, mild non-abrasive soap and a clean cloth to ...

  • Page 18

    Maintenance section 4 4-2 part number 5030763 5/11 cleaning checklist • check co 2 supply. If co 2 supply is low, an arrow on the primary regulator gauge will point to a shaded area that reads “low co 2 ” or “change co 2 cylinder.” • check syrup supply. • clean drain pan, grid, and splash panel. • c...

  • Page 19

    Section 4 maintenance part number 5030763 5/11 4-3 sanitizing beverage system cleaning sanitize the beverage system at initial start-up as well as regularly scheduled cleaning. The drain pan must be in place under soda valves, to carry away detergent and sanitizing agents that will be flushed throug...

  • Page 20

    Maintenance section 4 4-4 part number 5030763 5/11 5. Draw rinse water through system until clean water is dispensed. Most beverage valves allow the syrup side to be manually activated by depressing the syrup pallet. 6. Connect bucket 2 to system. 7. Draw detergent solution through system until solu...

  • Page 21: Section 5

    Part number 5030763 5/11 5-1 section 5 before calling for service checklist if a problem arises during operation of your dispenser, follow the checklist below before calling service. Routine adjustments and maintenance procedures are not covered by the warranty. Drink troubleshooting condition inves...

  • Page 22

    Before calling for service section 5 5-2 part number 5030763 5/11 this page intentionally left blank.

  • Page 24

    Manitowoc beverage systems 2100 future drive sellersburg, in 47172, usa ph: 812-246-7000 fax: 812-246-7024 visit us online at: www.Manitowocfsg.Com © 2011 manitowoc continuing product improvements may necessitate change of specifications without notice. Part number 5030763 5/11.