Server Server Express SE-SS 07952 User Manual - page 5
of
8
Page 5
If lid reassembly is needed:
PORTION CONTROL
Press lever several times until you see
product in discharge tube.
PRIME PUMP
4
to indicate product dispensed.
Align top edge of magnet to the top edge of
shroud face.
APPLY MAGNETIC GRAPHIC
5
THE LID IS SET TO DELIVER 1 OZ PORTIONS.
One hinge pin attaches lever to lid.
Second hinge pin attaches roller to lever.
(Controls portion dispensed.)
1/4 OZ
3/4 OZ
1/2 OZ
1 OZ
Install hinge pin through center
roller hole and desired portion
hole on lever.
Pin snaps into place.