ServerLink LKS-08D17W User manual - page 6
Manual is about: 1RU 17” Full HD LCD Console Drawer with Integrated
8 Port DVI/USB/Audio KVM Switch
of
10
6
2.2
Computer/Server Installation
Figure 3. Computer/Server Installation
2.2.1 Connecting Computers to KVM Switch
Step 1. Make sure all computers and peripherals are powered off.
Step 2. Power up the LCD Console Drawer by connecting the included AC power cable.
Step 3. Connect any optional shared USB 2.0 devices to the USB Hub ports on the KVM switch.
Step 4. Connect your computers to the KVM switch, using standard DVI cables, USB Type A to B
cables and 3.5mm audio cables if you want to switch audio.
Step 5. Power up the connected computers one by one. After your computers are powered up,
the LCD console drawer will be ready to use.