SERVIS DC60SS User manual - Usage
13
14
T: 0800 0124 382
T: 0800 0124 382
USAGE
When you first use your Oven you may notice a slight smell. This is perfectly normal and is
caused by the insulation materials on the heater elements. We suggest that before using
your Oven for the first time you leave it empty, and set at maximum temperature for 45
minutes. Make sure that there is sufficient ventilation in the installation area.
The surfaces of the Hot Plate are covered with a protective layer. When using for the first
time, operate the Hot Plates without a pan at level 3 for 5 minutes.
Adjusting the Hot Plates:
The control knob for each hot plate can be easily identified from the symbol above the knob.
Each knob has 7 different positions:
To select the desired position, rotate the control knob either clockwise or ant-clockwise.
When a Hot Plate is on, the Hot Plate warning light will illuminate.
When the knob is in the 0 position, the associated Hot Plate is turned off. The remaining
settings can be used as follows:
Setting
Use
1
Keeping Hot
2-3
Heating at Low Temperature
4-5-6
Cooking, Frying and Boiling
USING YOUR OVEN FOR THE FIRST TIME
Please ensure that the control knob is in the 0 position after use. The Hot Plate Warning
light will stay on after the Hot Plate is turned off to warn that the Hot Plate is still hot. The
Warning Light will only go out after the Hot Plate has sufficiently cooled. Do not touch a Hot
Plate before this time.
When using the Hot Plates we recommend that you use pan with a flat base and size that
matches the heating elements. Always centre the pan on the heating element to ensure
maximum efficiency and reduce heat loss.
The Digital Minute Minder:
The Digital Minute Minder can be used as a timer to assist with your cooking preparations. To
set the required time:
Simultaneously press the + and - buttons below the Digital Minute Minder until the display
starts to flash.
Set the desired time by using the + and - buttons. Once the time has been set, press the +
or - button. The symbol will be displayed and the timer will begin counting down.
At the end of the selected time period, your Oven will produce an audible beep but continue
carrying out the selected cooking setting. Turn all knobs to the 0 position to turn the Oven
off.
Please Note: You can change the tone of the audible beep:
While the current time is displayed, press and hold the - button until you hear an audible
beep. Press the - button again to cycle through the 3 available options. Once you have
selected the desired tone wait for the display to return to the current time setting.