User's manual auto-darkening welding helmet servo glas 4000 www.Servore.Com #406 woolim e-biz center, 170-5 guro-dongguro-gu, seoul city, korea. Tel : +82-2-861-6691/2 ◆ fax : +82-2-861-6693 home page: www.Servore.Com ◆ e-mail: servore@servore.Com iso 9001 en175 en379 z87.1.
User's manual auto-darkening welding helmet servo glas 4000 www.Servore.Com #406 woolim e-biz center, 170-5 guro-dongguro-gu, seoul city, korea. Tel : +82-2-861-6691/2 ◆ fax : +82-2-861-6693 home page: www.Servore.Com ◆ e-mail: servore@servore.Com iso 9001 ce 0299 en379 ce 0397 en175.
Servo glas4ooo instructions for use of servo glas 4000 thank you for purchasing a servo glas 4000 welding helmet. For your own protection, safety and to ensure the maximum service life of your new helmet please read this manual carefully before use. Misuse or abuse may result in injury or reduced pr...
Www.Servore.Com the appropriate available shade number markings and range are indicated on the product. Please ensure that the appropriate shade number is selected before welding. Used properly the servoglas 4000 provides eye and face protection to meet or exceed en379 and en175 and other relevant s...
6 www.Servore.Com 5 4. Technical specifications 0.05 msec - tig welding (pre-shading tech.) 0.06 msec - arc, mig, mag welding slow : 0.3-0.6s fast : 0.1-0.35s inactivated light shade #3 activated dark shade #9 ~ #13 sensitivity control adjustable uv/ir protection up to shade #13 lithium battery 3v 2...
8 www.Servore.Com 7 5-1. Shade control the required filter dark state can be selected by using the shade control. The servoglas 4000 can be adjusted between shades 9 to 13 with the embossed arrow on the dial indicating the current adjustment. Always use the appropriate shade for the welding operatio...
10 www.Servore.Com 9 6. Maintenance to replace the front cover plate, the filter cartridge must be removed from the recess in the helmet. Unlock the either side of cartridge holders pushing upward. After removing the filter cartridge from the recess in the helmet, gently push out the old plate. Ensu...
12 never expose the filter cartridge to direct contact with water or solvents. Note servo glas4ooo your servore welding helmet is strong and durable. It is designed to work in temperatures between -5c and +55c. Do not use your helmet in very hot conditions where temperatures exceed +65c. Always stor...
14 www.Servore.Com 13 10. Cautions ■ the servo glas 4000 is designed for personal eye and face protection from harmful radiation, sparks and welding spatter produced under normal welding conditions. Please follow good industry and safety practices and use additional protection where necessary. ■ cov...
