Www.Smartavi.Com installation manual view four different analog/digital video sources simultaneously on one screen with usb keyboard and mouse support. Quad k vm quadruple view kvm switch.
2 www.Smartavi.Com introduction the quadkvm switch allows you to view up to four different analog and digital video sources simultaneously on one display device. It also supports keyboard and mouse functionality, allowing you to access all four displays with one set of interface controls. Connection...
3 www.Smartavi.Com technical specifications what’s in the box? Part no. Qty description smqkvm 1 4-port dvi, usb 1.1 kvm switch with pip/dual/quad/full modes. Ps5vdc4a 1 5vdc4a power supply usb signal type usb 1.1 and 1.0 input interface (tx) (4) usb type b (female) output interface (rx) (2) usb typ...
4 www.Smartavi.Com mac quadkvm pc • corporate or educational presentations • financial (remote servers/user control) • call centers for technical support • industrial (long-range workstation isolation) • airport installations (air traffic control/passenger information) • kvm extension where exceptio...
5 www.Smartavi.Com 1. Power off all computers and the display. 2. Connect the usb output of each computer to the usb inputs on the quadkvm using male to male a to b usb cables. 3. Connect the dvi-d output of each computer to the dvi-d inputs on the quadkvm using male to male dvi-d cables. 4. Connect...
6 www.Smartavi.Com the quadkvm operates in much the same way as a conventional kvm. To view and control any input, simply press the corresponding button on the front of the quadkvm. For example, press 1 for the first input, 2 for the second input, and so on. The led lights will change accordingly. T...
7 www.Smartavi.Com the quadkvm can be controlled via keyboard hot-keys that make the functions of the quadkvm available at the console keyboard. The hot-keys are programmable via the osd menus. By default, the primary hot-key is scroll lock. To change the active input, press scroll lock twice and th...
8 www.Smartavi.Com the system osd option (f1 from the main osd) allows the user to configure the hotkeys (f1), change the osd position (f2), select from set users (f3), and scan the inputs 1-4 once (f4). Screenshot of the quadkvm’s system osd system the mode osd option (f2 from the main osd) allows ...
9 www.Smartavi.Com the configuration osd option (f3 from the main osd) allows the user to back up the settings (including pre-defined user settings) (f1) and to perform a factory reset to reset the quadkvm to its factory default settings (f2). The video osd option allows the user to select the activ...
10 www.Smartavi.Com once you have connected to the quadkvm, you must log in. To do so, type ‘i’ at the prompt and press . This will bring up the password entry feild. Type ‘smart’ and press to log in to the quadkvm. The quadkvm may also be controlled via rs-232 commands. To use these commands, you m...
11 www.Smartavi.Com the following is an example screen shot of the quadkvm help/options screen (this screen was displayed by pressing ?): rs-232 operation (continued) once you have entered the correct password, the following commands may be issued: help and a list of options ? Information i dual mod...
Www.Smartavi.Com © copyright 2012 smartavi, all rights reserved notice the information contained in this document is subject to change without notice. Smartavi makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness ...
