- DL manuals
- Smart-e
- Switch
- SDS-7000
- User Manual
Smart-e SDS-7000 User Manual
Summary of SDS-7000
Page 1
Page 1 of 21 ©smart-e(uk) ltd. Sds-7000 user manual sds-7000 rack mounted full hd presentation switcher & scaler with incorporated hdbaset in/out link user manual.
Page 2
Page 2 of 21 ©smart-e(uk) ltd. Sds-7000 user manual notice the information contained in this document is subject to change without notice. Smart-e makes no warranty of any kind with regard to the material, including but not limited to implied warranties of merchantability and fitness for particular ...
Page 3
Page 3 of 21 ©smart-e(uk) ltd. Sds-7000 user manual introducing the sds presentation switch/scaler what’s in the box? Thank you for purchasing the sds presentation switch/scaler. Your order should arrive to you in a smart-e branded matrix box, if any obvious damage is visible to the package on arriv...
Page 4
Page 4 of 21 ©smart-e(uk) ltd. Sds-7000 user manual introducing the sds presentation switch/scaler what is the sds presentation switch/scaler? The sds presentation switch allows the input of 9 video inputs to be switched to 2 outputs. The input video formats include: cvbs, (y,pb/cb,pr/cr), vga, hdmi...
Page 5: Installation And Operation
Page 5 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation before beginning the installation process ensure that all video displays and audio outputs are compatible with the specification of the sds presentation switch/scaler. The best procedure, if not sure about how to do this,...
Page 6: Installation And Operation
Page 6 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation hdmi supported protocols hdmi1.3a,dvi1.0,hdcp1.3 maximum pixel clock 225mhz interface bandwidth 6.75gbps(rgb:2.25 gbps/per lane) signal type in hdmi 1.3a / dvi 1.0 specifications hdmi / dvi-d all-digital t.M.D.S. Signal i...
Page 7: Installation And Operation
Page 7 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation hdbaset interface rj-45 female interface;1 hdbaset input,1 hdbaset output supported protocols conform to hdcp standard maximum pixel clock 225mhz impedance 100 Ω recommended maximum input distance the maximum transmission...
Page 8: Installation And Operation
Page 8 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation setup begin setup by connecting all input and output video and audio devices if unit being controlled via ethernet please ensure presentation switch connected to network port before progressing any further apply power to ...
Page 9: Installation And Operation
Page 9 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation control – video input selection firstly ensure the unit is in the correct mode for switching, when the av button is lit the unit is in audio switch mode, when the av button is not lit the unit is in video switch mode. To ...
Page 10: Installation And Operation
Page 10 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation control – audio input selection the audio switch function of the unit controls the audio output from the amplifier, balanced audio output on the rear of the unit. Ensure the av button is lit, this shows the unit is in au...
Page 11: Installation And Operation
Page 11 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation control – audio level setting the sds presentation switch has the ability to alter the level of the audio on the amplifier output. To alter the output level simply turn the volume control switch, the audible output shoul...
Page 12: Installation And Operation
Page 12 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation configuration – output resolution scaling your sds presentation switch has the ability to scale the video output(s) to suit the screen being used or compensate for quality of content being input to the system. The follow...
Page 13: Installation And Operation
Page 13 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation configuration – image settings the sds presentation switch and scaler has the ability to alter the brightness and contrast of the content being sent through the hdmi and hdbaset outputs. Firstly press the menu button tur...
Page 14: Installation And Operation
Page 14 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation configuration – edid setting the sds presentation switch reads the edid of the screen connected to its hdmi output when instructed to do so, it will then make this information available to the edid compatible sources pre...
Page 15: Installation And Operation
Page 15 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation configuration – serial control the sds presentation switch has the ability to be controlled via 232 using the dsub 9-pin socket on the rear of the unit. The pin connections for 232 communications between the sds and cont...
Page 16: Installation And Operation
Page 16 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation configuration – ip control a very useful feature of the sds presentation switch is the ability to control the unit via ethernet. This means the unit can be controlled from a remote location, be that in the same building ...
Page 17: Installation And Operation
Page 17 of 21 ©smart-e(uk) ltd. Sds-7000 user manual installation and operation structured cabling installation the sds presentation switch utilizes cat5e/6 cabling for hdbaset input and output and also for network connectivity. This is the desirable cable choice as many buildings have it pre-wired ...
Page 18: Transceiver Options
Page 18 of 21 ©smart-e(uk) ltd. Sds-7000 user manual transceiver options receivers there are a range of receivers available to accompany the sds presentation switch which have a range of abilities, giving you the option to pick the one most ideally suited to fit your environment and budget. 4k-rx900...
Page 19: Transceiver Options
Page 19 of 21 ©smart-e(uk) ltd. Sds-7000 user manual transceiver options transmitters there are a range of transmitters ideally suited for use with the sds presentation switch offering a wide range of connectivity and solutions to suit purpose and budget. Sds-tx911-wp the sds-tx911-wp is ideally sui...
Page 20: Troubleshooting
Page 20 of 21 ©smart-e(uk) ltd. Sds-7000 user manual troubleshooting power firstly check the issue does not lie with the mains lead try cable in another iec inlet device check the fuse in the cable to verify this has not blown video check all signal cables and swap if possible for known working ones...
Page 21: Appendix
Page 21 of 21 ©smart-e(uk) ltd. Sds-7000 user manual appendix limited warranty statement a. Extent of limited warranty 1. Smart-e (uk) ltd warrants to the end-user customers that smart-e product specified above will be free from defects in materials and workmanship for the duration of 3 years, which...