Installation & user guide multi-format video wall processor 32x32 hd video wall controller hdmi, vga, composite, s-video and y/pb/pr inputs integrated usb media player.
2 what’s in the box? Part no. Qty description mxwall-32x32-s 1 mxwall: 32x32 video wall controller. Power supply cord 1 (ccpwr06) manual 1 user guide table of contents table of contents / what’s in the box 2 technical specifications 3 introduction / features 4 applications 5 hardware installation / ...
3 technical specifications video video amplifier bandwidth 3.2g input video signal video (tmds) 0.5~1.0vpp input ddc signal 5 volts compliances hdmi 1.4 and hdcp pixel rates clock frequency beyond 165mpix/second format 4:4:4 and 4:2:2 data input formats resolution 480p, 720p, 1080i, 1080p input card...
4 introduction thank you for choosing smartavi’s mxwall for your ideal video wall solution. The mxwall offers top-notch hd dvi output for six different type of signal inputs. Create striking 32x32 dynamic wall displays easily with simple signal-switching and flexible connectivity. The mxwall even fe...
5 computer gaming console applications • corporate or educational presentations • airport installations • wall displays • digital signage • dealer rooms • control rooms • shopping centers • security • point-of-sale • entertainment venues • corporate lobbies • restaurants operational diagram rack ser...
6 1. Position mxwall conveniently and keep it unplugged. 2. Connect dvi output cables between the mxwall and your video wall screens 3. Connect any input to their corresponding signal source (blu-ray player, computer, etc) 4. Connect the ir receiver to the ir input jack at the back of the mxwall. 5....
7 computer gaming console control using the front panel front panel buttons • for menu, press the pip and win buttons simultaneously. • to switch to video wall mode, press the wall button. To switch to individual mode, press the indv button. • to switch to quad mode, press the quad button. • to swit...
8 control using on screen display (osd) on screen display (osd) gives users great flexibility and ease of use when looking to manage their video wall. It can be operated with the ir remote control and through the front panel buttons. Ir remote control the mxwall will only respond to the remote contr...
9 using rs-232 control the mxwall may also be controlled via rs-232 commands. This feature requires an rs-232 card installed on your computer or a usb to rs-232 adapter. Below are instructions on how to properly create an rs-232 connection between a pc the mxwall. Establish a connection to mxwall: 1...
10 there are two primary modes of operation for mxwall: command mode and cli mode. When connecting to the mxwall via rs-232, it will start in command mode. Cli mode is a more user- friendly way of operating the stretcherpro hd and includes instructional menus. The following section details the use o...
11 is carriage return (0x0d). All commands sent from pc end with (or the key if using hyperterminal). Rs-232 operation (continued) mode console command description & example video wall mode //v stretch the input across four screens (32x32). Clone mode //f clone the input into the four screens dual h...
12 firmware update the firmware of the mxwall can be upgraded by the end-user. Below are instructions on how to upgrade the firmware of your mxwall: 1. Power off the mxwall. 2. Connect the rs-232 cable from computer to the rs-232 port of the mxwall. 3. Download and install the chip45boot2 gui . 4. O...
