Smart-Pond AGNB User Instructions - page 2
PLEASE CALL 1-888-755-4497 BEFORE RETURNING TO THE STORE.
WWW.SMART-POND.COM
CAUTION
•
This pump has been evaluated for use with water only.
•
Use a proper power source as indicated on the pump label.
•
Keep the cord away from high temperatures or other heat sources.
•
Do not pump heated liquids.
•
Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
•
Operate in freshwater only. Avoid heavily chlorinated water and water with high pH levels.
•
Do not lift the pump by its power cord.
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
•
Estimated Assembly Time: 10 minutes
•
Tools required for assembly: No tools required.
OPERATION INSTRUCTIONS
1. Connect extension tubes to the pump using the supplied adapter.
Fig. 1
Fig. 1
2. Choose a fountain head for the desired water effect, and assemble
your choice as shown in Fig. 2.
Fig. 2
Extension tube
C
B
B
B
F
E
F
D
Adapter