1. DL manuals
  2. Smart+ Products
  3. Heater
  4. SPP-1800-6WC
  5. Owner's Manual

Smart+ Products SPP-1800-6WC Owner's Manual

Manual is about: INFRARED ZONE HEATING SYSTEM

Summary of SPP-1800-6WC

  • Page 1

    1 infrared zone heating system owner’s manual model no. Spp-1800-6wc warning: read this entire owner’s manual carefully before use..

  • Page 2

    2 thank you for choosing a smart+ products infrared zone heating system. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all t...

  • Page 3

    3 important safety instructions read and understand all instructions, safety warnings, and faq’s before using the heater warning! ! Potential for electrical hazard if not adhered to! When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric sh...

  • Page 4

    4 9. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations, nor any locations that use gfci outlets. 10. Never place heater where it may fall into a bathtub or other water receptacles. 11. Do not run cord under carpet. Do not cover cord with throw rugs, runners...

  • Page 5

    5 frequently asked questions (faq’s) my heater emits a “strange” odor when i first open the box/when i turn the heater on for the first time. Why? These are both normal . This heater is treated with a special heat safe/resistant coating. This odor will sometimes be present when the box is opened, an...

  • Page 6

    6 why doesn’t the temperature on my heater match the temperature display on my wall, or external thermostat ? This is completely normal . The temperature display on your heater may vary from the temperature display on another thermostat (like the one mounted to your wall or a purchased external ther...

  • Page 7

    7 why doesn’t the fan speed increase when i change the setting from low to high? This is normal . The heater’s fan’s speed is not affected by the hi/lo settings. The fan is designed to vent the heat at one soft, comfortable, and energy efficient speed. What is affected by the hi setting is the heat ...

  • Page 8

    8 specifications voltage rating 120 v (60hz) power consumption 1500w unit size 12 3/5 in. (w) x 20 in. (d) x 17 4/5 in. (h) unit weight 40 lbs safety features tip-over safety feature this heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will autom...

  • Page 9

    9 in the box infrared zone heating system instruction booklet remote control (2 aaa batteries sold separately) product diagram remote control air outlet wooden cabinet temp. Down temp. Up mode power timer temp. Down temp. Up mode power timer control panel wheel air intake cord clamp.

  • Page 10

    10 1. Remote control signal sensor 2. Digital display: indicates set desired room temperature 3. Power indicator light: indicates that the heater is receiving power from outlet. 4. On/off button: powers the display on and off 5. Energy-saving mode indicator: will be lit when energy-saving mode is en...

  • Page 11: Remote Control

    11 remote control ℃ / ℉ button: for alternating between fahrenheit and celsius on/off button: powers the display on and off temp up button: to increase desired temperature temp down button: to decrease desired temperature timer button: used to engage timer mode and to set hour value for the timer bo...

  • Page 12

    12 preparation place the heater on a firm, level surface and plug into a grounded 120v 60hz power outlet. Heater to be operated only in upright position with caster wheels attached. Turn on the main power switch in the rear of the unit. Press the on/off button on the display to power up the heater’s...

  • Page 13

    13 operating instructions 1. Power the display on/off and select desired mode or turn the heater on by pressing the on/off button on the control panel or by pressing the power button on the supplied remote control. Turn the heater off by pressing the on/off button on the control panel or by pressing...

  • Page 14

    14 the fahrenheit indicator led will light, when the temperature is displayed in fahrenheit. The celsius led will light, when the temperature is displayed in celsius. 3. Setting the power-off timer function note: the power-off-timer function will allow for the heater to power off after a certain set...

  • Page 15

    15 5. Setting electro lock the electro lock can help avoid the heater from being accidentally engaged by children. The locking mechanism can be set in both the display on and off modes. And press temp up and temp down buttons at the same time for 3 seconds. Locking is complete when you hear a beep. ...

  • Page 16

    16 maintenance 1. Unplug the unit and let it cool completely. 2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. Caution: do not let liquid enter the heater. 3. Do not use alc...

  • Page 17

    17 storage store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit. Basic troubleshooting if the heater will not operate, please check the following before seeking repair advice: 1. Check if the power cord is plugged ...