1. DL manuals
  2. Smart+ Products
  3. Indoor Fireplace
  4. SPP-IF1500-MOFP
  5. Owners Installation And Operating Manual

Smart+ Products SPP-IF1500-MOFP Owners Installation And Operating Manual

Manual is about: Infrared Fireplace Heater

Summary of SPP-IF1500-MOFP

  • Page 1

    1 infrared fireplace heater owners installation and operating manual model: spp-if1500-mofp safety notice please read this entire installation and operating manual before installing and using your new infrared fireplace heater. Failure to fully understand and follow instructions may result in proper...

  • Page 2: Table Of Contents

    2 table of contents topic page(s) introduction 3 specifications 3 safety information 4-5 fireplace placement 6 fireplace operation 7 troubleshooting and fireplace maintenance 8 *contents in the box: 1. Infrared fireplace heater 2. Instruction manual 3. Remote control (2 aaa batteries not included).

  • Page 3: Specifications:

    3 introduction thank you for choosing one of the best infrared absorption fireplace heaters available in the market today. By using this infrared fireplace heater you can efficiently heat up to 1500 square feet! You can even turn down the main thermostat in your home and let this heater carry some o...

  • Page 4

    4 important safety instructions read and understand all instructions before using the heater warning ! Potential for electrical hazard! When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the follo...

  • Page 5

    5 15. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or re-locatable power tap (outlet/power strip). This heater has a self – protection function. If the heater does not operate normally, check cord and heater placement, then unplug it from the outlet & ...

  • Page 6

    6 fireplace placement our infrared fireplace heater is a very safe and effective room heater. It produces safe, clean and economical heat by utilizing quartz infrared heating elements and heat exchangers. The heating process of the infrared fireplace heater is similar to the way the sun warms the ea...

  • Page 7

    7 control panel remote control fireplace operation plug your infrared fireplace heater power cord into a 120v, 15amp or 20amp three-bladed receptacle. To turn the fireplace on : press the power button on the control panel or on the remote control. Default set temperature : the default set temperatur...

  • Page 8

    8 troubleshooting if your heater unit shuts off unexpectedly: 1. Be sure the power cord is plugged into a working electrical outlet. 2. Check for any obstructions. If you find one, turn the hearting unit off and unplug it. Wait at least 10 minutes to allow the heating unit to cool completely before ...

  • Page 9

    9 3. Remove old bulb and replace with a new one. Hold the socket while unscrewing or screwing bulbs. 4. Replace the cover of light bulbs..