Summary of 44-850 Apollo
Page 1
User manual 44-850 apollo touchscreen thermostat.
Page 3: Table of Contents
Table of contents introduction ........................................................................................................................................... 3 . Using the touchscreen display ..................................................................................................
Page 4: Table of Contents
Table of contents overrides ...................................................................................................................................... 19, 20 temporary temperature override ................................................................................ 19, 20 permanent h...
Page 5: Introduction
Introduction your new 44-850 is a feature-rich touchscreen thermostat has been manufactured using the highest quality components and design currently available. When properly installed and configured by a professional heating and air conditioning contractor, the 44-850 will provide years of dependab...
Page 6
Using the touchscreen display pm am heat 2 3 cool 2 auto e. Heat mon tue wed thu fri sat sun outside air temperature automatic always on off morning day evening night clean screen 88/88/2088 cool heat set back next hold days of the week time of day 12 hour only with am/pm indication day, month, year...
Page 7: Typical Display
Typical display am heat wed automatic morning 01/01/2014 heat set during normal operation, the 44-850 typically displays the following: 1. Day of the week 5. Fan selection 2. Time of day 6. Program period (programmable mode only) 3. Calendar 7. Mode of operation 4. Space temperature 8. Set temperatu...
Page 8
Setting the day, time and calendar am mon 01/01/2014 touch the display to bring on the back light then touch and hold the clock with your finger. The thermostat will beep. The hour will flash. Touch the up or down arrow to change the hour making sure that am or pm are correct. Touch the clock again ...
Page 9: Basic Functions
Basic functions mode configurations your contractor can configure the thermostat with different mode selections based on user preference and/or equipment type. Mode configurations can be as follows: conventional heating and cooling equipment (gas/electric) manual changeover (heat/cool/off) auto chan...
Page 10: Basic Functions
Heat set basic functions mode selection to select a mode of operation, simply touch the mode box on the screen. Based on the equipment and thermostat configuration, mode selection can be as follows: off - thermostat will not call for heating or cooling. Heat - thermostat will only call for heating. ...
Page 11: Basic Functions
Basic functions fan selection touch the fan box on the screen to select automatic or always on fan mode. In automatic mode, the fan operates with a heating or cooling call. If set to always on, the fan will run continuously. If the thermostat is turned off while the fan is set to always on, the fan ...
Page 12: Basic Functions
Basic functions changing the heating or cooling temperature setting manual heat/cool mode in manual changeover mode, only the heating or cooling temperature setting will be displayed. To change the setting, simply touch the temperature displayed on the screen. Depending on the mode, either heat set ...
Page 13: Basic Functions
Basic functions changing the heating or cooling temperature setting auto mode in auto changeover mode, the heating and cooling temperature setting alternate on the screen. To change the settings, simply touch the temperature displayed on the screen. Cool set will flash three times and then heat set ...
Page 14: Programming
Programming 7-day schedule (4 or 2 daily events) your installer can configure the 44-850 with two programming options for 7-day scheduling. You can elect to have 4 daily events (morning, day, evening, night) or 2 daily event (day, night) for each day of the week. You can program both heating and coo...
Page 15: Programming
Programming 7-day schedule (4 or 2 daily events) your installer can configure the 44-850 with two programming options for 7-day scheduling. You can elect to have 4 daily events (morning, day, evening, night) or 2 daily event (day, night) for each day of the week. 4 daily events press and hold progra...
Page 16: Programming
Programming touch program again and the morning start time will appear. The hour and am or pm will flash. Touch the up or down arrow to change the morning start time hour. The factory default is 6:00 am. Touch program again and the minutes will flash. Touch the up or down arrow to change the minutes...
Page 17: Programming
Programming touch program again and the morning cool set temperature will be displayed and flash. Touch the up or down arrow to change the cooling temperature. The factory default if 25° for the morning schedule. Touch program again and the morning heat set temperature will be displayed and flash. T...
Page 18: Programming
Programming touch program again and the day start time will appear. The hour will flash along with am or pm. Follow the same steps as in the morning sequence. The factory defaults for the day event are 8:00 am, cool set 25°, heat set 16° c. After setting the day heat set temperature, touch program a...
Page 19: Programming
Programming if you elect to have a different schedule for each day of the week, simply touch program when copy appears. The thermostat will automatically advance to the next day. 2 daily events seven day scheduling for 2 daily events uses the same programming steps as 4 daily events other than you o...
Page 20: Programming
Programming programmable fan if your installer has configured the 44-850 with the programmable fan option, you will be able to select automatic or always on fan with each programmed event. When programming the thermostat, the programmable fan option will appear at the end of each programming event. ...
Page 21: Overrides
Overrides when the 44-850 is configured for programmable operation, there are two types of temperature overrides available. Temporary temperature override temporary temperature override is designed to allow you to adjust the heating or cooling temperature without affecting the programmed temperature...
Page 22: Overrides
Overrides the new heating temperature will remain active until the next scheduled event takes place at which time it will be deleted and only the programmed temperatures will be used. To manually cancel temporary override, touch program until hold appears and then touch hold. The thermostat will res...
Page 23: Other Options And Features
Other options and features adaptive recovery option if your thermostat has been configured for programmable operation, your installer can add the adaptive recovery option. Adaptive recovery compares the space temperature deviation from the set temperature for the next scheduled event and rate of rec...
Page 24: Other Options And Features
Other options and features low battery indication your thermostat uses two aa alkaline batteries to keep the time-of-day clock running in case of a power failure. In some applications, battery power is also used to control the heating and air conditioning equipment. When the low battery icon appears...
Page 25: Changing The Batteries
Changing the batteries press in on the battery access compartment and slide the drawer out. Install two aa alkaline batteries matching the + (positive) and - (negative) orientation. Push the battery compartment in until it clicks shut. When the batteries are properly installed, the touchscreen displ...
Page 26
01-101115 www.Thermostat.Com.Au designed and engineered in australia by.