Smart Tracker GT06 User manual - page 15
Send oil cut-off command on platform. To make sure the security of vehicle,
tracker can only indicate to cut off oil when GPS is in valid position status, and
the speed is less than 20KM/H or in static. It needs password and platform
account password is needed when sending oil cut off command.
7.8.2. Via SMS
Firstly, you should set a center number. Only center number can send the
command to the device to cut off and restore oil.
The format is:
RELAY,1#
After the command is carried out, it will reply “Cut off the fuel supply: Success!
Speed:0 Km/h
”. If the command didn’t carry out, it will reply the reason about
fail to carry out.
Note: To ensure the safety of the driver and the car, this command is valid
only under two conditions: the GPS is located; the speed is less than 20km/h
7.9 Restoring Oil
7.9.1. Via platform
When the alarm is off, sending recover oil commands manually. Device will
restore oil supplying, and vehicle will work normally again.
Platform account password is required when sending oil cut off command.
7.9.2. Via SMS
Only center number can send the command to the device to restore oil.
The format is
:
RELAY,0#
After the command is ca
rried out, it will receive “Restore fuel supply:Success!”
8.Web based tracking online activation
The GPRS web based tracking platform allows real time tracking with the
latest Google maps. There is also a playback feature that allows you to view
where the vehicle has been for up to 30 days in the past making it ideal for fleet
management.
9.Trouble shooting
9.1. After installing it in the first time, if device can not get connected with
platform server, at this time it is “logged off” status in platform.
Please check the installation of device:
1) Check whether the connection of power-line is correct, please do not
connect it with the car control line.
2) Check whether SIM card is installed correctly, please refer to the
installation manual;
3)
Check whether the power switch is toggled to “ON”, the switch is in the left