Smart View IC-712-IAUR User manual
KVM
SWITCH
(IC-712-IAUR)
(IC-714-IAUR)
USER MANUAL
V1.0
IC-712-IAUR
IC-714-IAUR
Package Contents –
1 Smart View IC-712-IAUR or IC-714-IAUR KVM
Switch
1 User Manual
Please contact your vendor if anything is missed.
Features
Controls PCs with one USB keyboard, USB mouse and
monitor respectively
Supports USB 1.0, 1.1, 2.0 specification compliant and
supports UHCI, OHCI & EHCI host controller
Supports USB Boot protocol & Wakeup Devices
Supports speaker & microphone
Supports the Windows, Linux and Macintosh
Supports Microsoft IntelliPoint 5.0 drivers & Logitech
SetPoint Driver (Except MX5500, Logic)
Superior video quality - Up to 1920 x 1440, DDC, DDC2,
DDC2B, DDC2AB, 200MHz
3 ways for PC selection -- Push-button switch or hot key
or mouse clicking
Easy to install--No software required
Hot
Pluggable
Specifications
Function IC-712-IAUR
IC-714-IAUR
PC Connectors
2
4
Port Selection
Push-button Switch / Hot Key
/ Mouse Clicking
On Line
2
4
LEDs
Selected 2
4
Console Port
2x USB A-Type
Connector
-Keyboard,
Mouse
CPU Port
2x USB B-Type
4x USB B-Type
Console Port
1x HD-15 Female (Std. VGA/SVGA)
Connector
-Monitor
CPU Port
2x HD-15 Male
(Std. VGA/SVGA)
4x HD-15 Male
(Std. VGA/SVGA)
Console Port
1 x Audio, Microphone
Connector
-Audio,Mic.
(Jack)
CPU Port
2 x Audio, Mic.
4 x Audio, Mic.
VGA Resolution
1920x1440 (Max.),
DDC, DDC2,
DDC2B, DDC2AB, 200MHz
Power Adapter
DC 9V 300mA (Min.) spare
Scan Interval
5 sec ~ 30 sec
Housing Metal
Weight
469 g
660 g
Dimensions (LxWxH)
130x76x42 mm
200x76X42 mm
Hardware Requirements
Required
specifications
Console
One highest resolution VGA, SVGA or Multisync monitor
One USB mouse
One USB keyboard
One pair of speakers.
One microphone.
PC
One VGA, SVGA or Multisync card
One USB port
One audio jack port.
One microphone port.
Cable
Smart View custom cables or equivalent
-1-
Appearance
Front View
1. Push-button Switches (Manual type)
2. Port LEDs
3. Console Keyboard and Mouse Connectors
Rear View
1. Console Monitor, Speaker and Microphone
Connectors
2. CPU Port Connectors
Installation
Before the installation, make sure the peripherals of all
PCs are grounded properly and turned off.
1. Connect the monitor, keyboard and mouse with the
Console Port Connectors.
2. Use the recommended extension cables to connect
the PCs with the CPU Ports of KVM Switch.
3. Turn on the PCs.
-2-