1. DL manuals
  2. Smart Witness
  3. Camcorder
  4. SVC300GPS
  5. User Manual

Smart Witness SVC300GPS User Manual - Software Installation

Manual is about: 3 camera vehicle journey recorder

Summary of SVC300GPS

  • Page 1

    Svc300gps ! 3 camera vehicle journey recorder ! ! ! Thank you for purchasing this journey recorder. ! ! Please ensure that you read and understand this user guide and use it before connecting and installing this recorder. ! ! Please store the user guide in an easily accessible location. Ver 1.0.0 1 ...

  • Page 3: Caution

    Caution damages due to production malfunction, loss of data, or other damages occurring while using this product shall not be the responsibility of the manufacturer. Although the product is a device used for recording videos, the product may not save all videos in the case of a malfunction. In the c...

  • Page 4: Gps Reception

    Gps reception 1. ! Activate the product in an area without large buildings to improve gps reception. 2. ! The temperature range for optimum operation of the gps receiver in your car is -10 ~ 50°c. 1. ! When using the product for the first time or after a long period (more than three days), it may ta...

  • Page 5: Contents

    Contents 5 wire splice clips (x5) sticker for mounting (double sided 3m tape x1) smart witness svc300gps receiver & recording unit 4gb sd memory card (note: analysis software is on this sd card) usb sd card reader smart witness svc300 gps antenna unit remote controller.

  • Page 6: Contents

    6 contents av output cable power cable 2x camera input cable.

  • Page 7: Identifying Parts

    Identifying parts svc300gps journey recorder rear 7 sd slot sd door av output external mic input speaker internal microphone camera input 1, 2 remote control input gps input power input & alarm (car signal) input rear view camera input front.

  • Page 8: Identifying Parts

    Identifying parts remote controller 8 record led (blue) overwrite led (red) snap shot button play button record button av output cable video output 1 video output 2 audio output.

  • Page 9: Identifying Parts

    9 identifying parts power & car signal input fuse 250v 3a power (+) (red) ground (black) alarm 1 (blue) alarm3 (yellow) alarm 2 (green) car pulse (speed) (white).

  • Page 10: Function (Main Unit)

    Function (main unit) automatic start turn on the vehicle power, svc300gps will be automatically started. (use the power cable provided). Event record the event recording will be start automatically by the alarm 1 to 3 or by the g-sensor level. Panic record the panic recording can be started by press...

  • Page 11: Function (Main Unit)

    Built-in power backup (super capacitor) if power to the unit is interrupted, svc300gps creates the last file using the internal battery. Blue led (record) the blue led shows the power is on. It will flash during event recording. Red led (warning) the red led will turn on when there is video loss or ...

  • Page 12: Operation

    Operation begin recording 1. ! Make sure that the power cable is properly connected and turn on the car power. 2. ! Blue led & red led will turn on and flashing slowly simultaneously and then the blue led will remain on. Blue led light means svc300gps is now ready for recording. Removing the sd memo...

  • Page 13: Operation

    Operation 13 press the play button and the information osd (on screen display) will show up on the monitor as below: the information osd will be turned off automatically after 30 seconds. Information osd live view turn on the svc300gps and press the play button to turn on the information osd (on scr...

  • Page 14: Operation

    G-sensor calibration unsuccessful. Press any key. Operation g-sensor calibration 14 g-sensor calibration is needed after installing the svc300gps. It detects the installed direction of the svc300gps for it to accurately record the journey direction. 1. ! Press and hold the play & stop buttons togeth...

  • Page 15: Operation

    Operation panic record by record button 15 begin recording automatically by pressing the record button. Recording will start with one short ‘beep’ sound and the blue led will be flash during the recording. The svc300gps will not make a separate event file during the continuous recording. It will mar...

  • Page 16: Operation

    Operation playback 16 press and hold the play button for more than 2 seconds. The latest recorded file will playback on the screen. Playback control panel playback control button channel change : press the record button. Move to the previous file: press and hold the stop & play button. Move to the n...

  • Page 17: Software User Guide

    Software user guide svc300gps pc viewer guide 17 pc system requirement if the pc does not meet the minimum system requirement, the analysis software may not function properly. Os windows 2000, windows xp windows vista, windows 7 cpu pentium4 2.6ghz or higher ram 512mb or higher interface sd memory c...

  • Page 18: Software Installation

    18 software installation 1. Connect the sd card into your pc (if your computer does not have and sd card slot use the usb sd card reader) and open the “my computer” 2. Right-click the “driverec1” drive and select open 3. Double click setup.Exe in the ‘pcsw’ folder. 4. Select the language and then fo...

  • Page 19: Connect Sd Memory Card

    Connect sd memory card 1. Connect sd memory card in to the sd card reader. 2. Run ‘smart witness’ 3. Select file and then click ‘select data folder’ or click the open button 19 [open] button 4. Select sd memory card folder at the folder select window..

  • Page 20: Pc Viewer Settings

    Pc viewer settings 20 the ‘date’ formats and ‘speed’ unit will be set automatically according to the pc windows setting. However it can be changed with this pc viewer setting menu. To see the better quality playback picture on your pc, check deblocking box. To set pc viewer select file and then clic...

  • Page 21: Select File For Playback

    Select file for playback 5. Check the file from the list using mouse or click the ‘all’ button and then click the ‘load’ button. 21 the event file list recorded by a triggered g-sensor or alarm1~3. The panic file list recorded by pressing the record button. The continuous record file list. The snaps...

  • Page 22: Playback Screen

    Playback screen 22 g-sensor data ud: up/down direction fr: front/rear direction lr: left/right direction [ nor ]: normal recording [ g-sensor ]: event recording display frame/total number of frames playback position indicator event data in the playlist . Check box for continuous playback this button...

  • Page 23: Playback

    Playback speed ch1 ch2 ch3 volume drag & move the white line to move the playback position. Single view (ch1, ch2, ch3) quad view playback buttons pause next image previous image x0.5, 1 play x2, 4, 8, 16 fast forward x0.5, 1 reverse x2, 4, 8, 16 fast reverse 4x4 multi view (thumb-nail function) zoo...

  • Page 24: Playback

    Playback 24 pc keyboard hot buttons function pc keyboard hot buttons 1024x768 mode enter (return to the previous mode: enter) full screen mode alt + enter (return to the previous mode: enter) playback speed control ctrl + f 0.5 => 1 reverse playback speed control ctrl + b 0.5 => 1 pause / play space...

  • Page 25

    The route taken will be displayed on the google map at lower right corner of the software. Google maps (for ‘event’ recording files) 25 zoom out note: •! To see the route and position on the google map, the gps data should be recorded with video. •! To see the map , the pc should be connected to the...

  • Page 26: Thumbnail Function

    7. Click button for 4x4 multi view (thumbnail function) thumbnail function 26 shortcut : click the right mouse button of to go back to single image playback mode. Click the thumb-nail image to change the playback position. Click the close button to finish the event playback. The ‘playlist’ window wi...

  • Page 27: Saving Jpg File & Avi Files

    Saving jpg file & avi files pause the playback and click ‘save image’ icon to make a jpg file. Pause the playback and click ‘save avi’ icon to make a avi file. ‘save image’ icon ‘save avi’ icon 27.

  • Page 28: Printing An Image

    Printing an image ‘print image’ icon pause the playback and click ‘print image’ icon. Input the file name (print title) & any notes (print comment) using keyboard. The print comment window allows up to 7 lines in total. 28.

  • Page 29: Generating A Report

    Generating a report click the print button in the print preview windows for printing. The file name (print title), any notes (print comment), g-sensor graph & map will be printed on the first page. The second page will print the images selected. Click ‘2x2’ and then click ‘print’ to print 4 images i...

  • Page 30: Backing Up Event/log Files

    Backing up event/log files click the ‘backup’ icon to backup the files to the pc. ‘backup’ icon select and load ‘event’, ‘normal’, ‘panic’, ‘log’ & ‘memo’ data first, before clicking the ‘backup’ icon. The selected files will appear in the lists in the backup window. Or check ‘backup all’ and press ...

  • Page 31: Setting The Drive Recorder

    Setting the drive recorder click the ‘setting drive recorder’ icon for setup. ‘setting drive recorder’ icon important backup sd card data first, before clicking the ‘initialize sd card’ button or before changing the record mode from normal mode to event mode or vice versa. All normal recording data ...

  • Page 32: Setting The Drive Recorder

    Normal mode continuous recording will automatically start after booting the svc300gps. Event mode recording by g-sensor, alarm1~3 or [record] button. Setting the drive recorder 32 resolution d1(720x480), half-d1(720x240) fps (frames per second) 1 camera supports 1~30 fps 2 cameras supports 1~15 fps ...

  • Page 33: Setting The Drive Recorder

    Setting the drive recorder to record the car signal with video, set the alarm configuration as below: to use the alarm as an event trigger, (i.E: so event recording will start when a door is opened or a meter is on) set the alarm configuration as below: g-sensor settings if g-sensor sensitivity valu...

  • Page 34: Setting The Drive Recorder

    Setting the drive recorder 34 vehicle id type in your vehicle id buzzer set the ‘beep’ sound on/off when event recording starts video type this should be set to pal search on system to use the playback function on the recorder. System settings date/time settings timezone: gmt this setting will allow...

  • Page 35: Setting The Drive Recorder

    35 new sd memory card initializing should be done using tool menu. 1. ! Insert new sd memory card into the pc. 2. ! Run “pc viewer svc300gps” 3. ! Select tool from the menu and then click ‘sd initialize’ we recommend you initialize the sd memory card at least once per month to prevent the svc300gps ...

  • Page 36: Setting The Drive Recorder

    Click the ‘about’ icon to check the product information. ‘about’ icon setting the drive recorder 36 about product information.

  • Page 37: Log File Playback

    Log file playback select the log tab window and then check the log file from the list using mouse or click the ‘check all’ button. Then click the ‘load’ button. Gps speed, g sensor x value, g sensor y value, g sensor z value data can all be used to narrow a search for journey information. The small ...

  • Page 38

    38 gps log to kml converter (for google earth) to see the whole route on google earth, select the log file and click the google earth button. 1. ! Install the google earth on your pc. ( http://earth.Google.Com/ ) 2. ! Check the log file 3. ! Click google earth in the tool menu we recommend to use go...

  • Page 39: Accessories

    !"#$"% &'$()* #&!$+ #&!$, -./ 0# .(120 02&0$'"21 #&! #&!$+ #&!$, -./ 0# .(120 02&0$'"21 #&! #&!$+ #&!$, -./ 0# .(120 02&0$'"21 #&! !"#$"% &'$()* !"#$"% &'$()* !"#$"% &'$()* accessories 39 high resolution vandal resistant colour camera with ir night vision. Includes bracket. See diagram below for con...

  • Page 40: Accessories

    Accessories monitors 40 5” or 8” lcd monitor can be used with the svc300gps to view images from the cameras, playback recordings and also as a rear view monitor when reversing. See diagram below for connection to the svc300gps unit: internal microphone see diagram below for connection to the svc300g...

  • Page 41: Specification

    Specification 41 svc300gps video ch1 (front), ch2 (interior), ch3 (rearview) audio internal / external microphone continuous/event recording speed 720x576 (25fps) 720x288 (50fps) snapshot record still image with 5 seconds audio backup sd memory card memory 4gb sd memory card (supports sdhc cards of ...

  • Page 42

    Technical support & warranty technical support for technical support, please contact your local distributor. Limited warranty this product is supplied with 1 year warranty. The warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear....

  • Page 43

    Manufactured exclusively for: ! Www.Smartwitness.Com ! Smart witness is a division of xvision !.