Video intercom user manual c10savk2.
2 hands free video monitor (c10savm-2) outdoor station (c10savep-2) system overview the smartaccess ® video intercom kit ( c10savk2) includes one outdoor station, one hands free video monitor and a power supply. Additional units can be purchased using the codes shown below. Door monitoring (comes wi...
3 system configuration notes: the system should be wired using standard 4 core alarm cable. (cat5 is not recommended) the system supports two door stations. A dc14.5v transformer is required for every hands free video monitor on the system. The system supports a maximum of 4 hands free video monitor...
4 outdoor station mounting instructions 1. Remove the door station from its rain shield by removing the screw at the base of the unit. 2. Mark and drill 2 holes to mount the rain shield. 4. Attach the door station to its rain shield and secure using the screw at the base of the unit. 5. Use silicon ...
5 sample wiring diagram one entrance panel - two monitors dc14.5v transformer lock wiring dc14.5v transformer front door.
6 lock wiring dc14.5v transformer lock wiring sample wiring diagram two entrance panels - one monitors front door back door.
7 operating instructions 1. Call: visitor presses call button. 2. All video stations ring and display the live camera image. 3. Answer: to speak to the visitor, press this button. 5. Door release: press this button to release the door. 6. Monitoring: when the system is in standby, press this button ...
8 specifications outdoor station camera: lens: dimensions: back light: power supply: operating temperature: weather resistance: door release colour 1/3” ccd 3.6mm 135 x 58.5 x 40mm 4 leds power from monitor -20°c to 70°c ip45 dry contact n/o going n/c duration 3 seconds hands free video monitor moni...