SmartDisk Firewire CD-R/W User Manual - Pc Users

PC Users

16

SmartDisk FireWire CD-R/W User Guide

PC Users

To connect SmartDisk FireWire CD-R/W to your PC:

1

Connect one end of the FireWire cable to the FireWire port on your computer. 

2

Connect the other end to a FireWire port on SmartDisk FireWire CD-R/W. 

The SmartDisk FireWire CD-R/W icon appears in 

My Computer and in 

Windows Explorer as described below. 

Drive Letter Assigned

After you connect SmartDisk FireWire CD-R/W to your PC, the CD-R/W drive is 

assigned the next available drive letter in 

Windows Explorer or My Computer. For 

example, if your hard drive is assigned the letter C: and a removable disk drive is 

currently installed on your computer using the letter D:, then the letter E: is assigned 

to the SmartDisk FireWire CD-R/W.

Congratulations! You can now use SmartDisk FireWire CD-R/W to read and write 

CDs. 

Caution

Do not force the connection as damage may occur to the connector 

or the FireWire port.

Note

If the SmartDisk FireWire CD-R/W does not appear in My Computer and 

the computer is connected to a network, change your mapped network 

letters to start at a higher letter. If you are unsure on how to do this, ask 

your System Administrator for assistance. 

FireWire Cable

FireWire Ports