Smartenit Harmony P3 6007A Quick Start Manual
The Harmony P3 offers ultimate flexibility for home and
building automation control.
The Harmony P3 communicates with ZigBee devices
on the Home Automation (HA) profile, WiFi devices, as
well as INSTEON and X10 devices when connected to an
EZIComm PLM.
Control and monitor your home automation
network from any computer connected to the local
network or the Internet.
2013 Compacta International, Ltd. - Rev.
10/13
Harmony P3, iSmartenit, and Smartenit are trademarks of Compacta Intl. Ltd.
INSTEON is a registered trademark of SmartLabs, Inc. X10 is a registered trademark of X10.
Ethernet Cable
Power Cable
USB Ports
Antenna
(949) 429-3303
Technical Support
Smartenit.com
Quick Start Guide
- Harmony P3
Model #6007A
Product Brief
Installation
For more information, please visit our Wiki
http://wiki.smartenit.com
Home Automation Network Gateway
Set-up
As updates are made for the best user experience, please visit our Wiki to get the most recent “how-to” instructions for using
the iSmartenit application with your gateway.
iSmartenit Wiki - http://wiki.smartenit.com/index.php?title=iSmartenit
Basics
Install iSmartenit app - available on iTunes, Google Play, or open web app at http://app.smartenit.com
Create a user account to register your gateway for easy access from any iSmartenit application (optional)
Discover the Harmony P3 gateway on your local network
Discover your smart devices
Directly control and monitor your smart devices
Set up Wizards to automate smart device control and monitoring
1.
2.
3.
4.
5.
6.
The Harmony SE must be installed indoors
Register
Register the device with your electric utility using the included
installation code and the instructions provided by the utility.
Each code is unique to a particular device, so please ensure the
provided numbers are entered correctly.
Connect network cable to Ethernet port and Internet router
Connect power supply
Point antenna upwards
1.
2.
3.
4.
The Harmony P3 must be installed indoors
Screw antenna (included) onto antenna port and point upward
Connect Ethernet cable (included) between Ethernet port and live
router
Connect power cable (included) to power port and plug in to 120V AC
Optional: If using an EZIComm for INSTEON or X10 communication,
connect the EZIComm to a USB port. You’ll need a USB to serial adaptor.
1.
2.
3.
4.